CAN Transceiver for 24 V Systems

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The PCA82C251 is the interface between a CAN protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.

See product image

Data Sheet

Application Notes

Product Details

Block Diagram

PCA82C251T

Get diagram PDF

Features

Key Features

Fully compatible with the “ISO 11898-24 V” standard
Slope control to reduce Radio Frequency Interference (RFI)
Thermally protected
Short-circuit proof to battery and ground in 24 V powered systems
Low-current standby mode
An unpowered node does not disturb the bus lines
At least 110 nodes can be connected
High speed (up to 1 MBd)
High immunity against electromagnetic interference
High-speed applications (up to 1 MBd) in trucks and busses

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Documentation

Quick reference to our documentation types.

9 documents

Compact List

TJA1040 high speed CAN transceiver[AN10211]

PDFNov 10, 2006Rev 1.0
TJA1041/1041A high speed CAN transceiver[AN00094]

PDFNov 8, 2006Rev 1.0
TJA1050 high speed CAN transceiver[AN00020]

PDFDec 2, 2002Rev 1.0
PCA82C250/251 CAN Transceiver[AN96116]

PDFMar 11, 1998Rev 1.0

CAN transceiver for 24 V systems[PCA82C251]

PDFFeb 11, 2016Rev 4.01

Plastic, small outline package; 8 terminals; 1.27 mm pitch; 4.9 mm x 3.9 mm x 1.75 mm body[SOT96-1]

PDFJan 9, 2017Rev 1.1

SO8; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering code (12NC) ending 118[SOT96-1_118]

PDFApr 19, 2013Rev 2.0

Footprint for Wave Soldering[SO-SOJ-WAVE]

PDFOct 8, 2009Rev 1.0
Footprint for reflow soldering[SO-SOJ-REFLOW]

PDFOct 8, 2009Rev 1.0

Design Resources

Design Files

Receive the full breakdown. See the product footprint and more in the eCad file.

Software

Quick reference to our software types.

1 software offerings

BSPs and Device Drivers
Micro CANopen Plus

By Embedded Systems Academy, Inc. Gold Partner

Engineering Services

To get further assistance directly from NXP, please see our Engineering Services.

3 engineering services

Independent Design House (IDH)
Hardware Design Services

By TAGnology RFID GmbH GoldHQ: Voitsberg, AustriaSupporting Regions: EMEA
Independent Design House (IDH)
Hardware/Software Engineering Services

By Bluewind GoldHQ: Castelfranco Veneto, ItalySupporting Regions: EMEA
Independent Design House (IDH)
Embedded Software Design

By TAGnology RFID GmbH GoldHQ: Voitsberg, AustriaSupporting Regions: EMEA

To find additional partner offerings that support this product, visit our Partner Marketplace.

Support

What do you need help with?

Recommended Communities

Other NXP Products

CAN Transceiver for 24 V Systems

Product Details

Block Diagram

PCA82C251T

Features

Key Features

Buy/Parametrics

Documentation

Filter by

Application Note (4)

TJA1040 high speed CAN transceiver[AN10211]

TJA1041/1041A high speed CAN transceiver[AN00094]

TJA1050 high speed CAN transceiver[AN00020]

PCA82C250/251 CAN Transceiver[AN96116]

Data Sheet (1)

CAN transceiver for 24 V systems[PCA82C251]

Package Information (1)

Plastic, small outline package; 8 terminals; 1.27 mm pitch; 4.9 mm x 3.9 mm x 1.75 mm body[SOT96-1]

Packing Information (1)

SO8; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering code (12NC) ending 118[SOT96-1_118]

Supporting Information (2)

Footprint for Wave Soldering[SO-SOJ-WAVE]

Footprint for reflow soldering[SO-SOJ-REFLOW]