Audio
Interfaces
Peripherals and Logic
Power Management
Sensors
RF
RFID/NFC
Security and Authentication
Wireless Connectivity
Browse all products
Product Information
Application-Specific Products
NXP Community
Design ideas, demo videos, quality answers. Connect with NXP professionals and other knowledgeable designers ready to help.
Design Resources
Software, documentation, evaluation tools. The resources to build comprehensive solutions and accelerate your time to market.
Access our design resource library
Careers at NXP
We're always looking for passionate and talented people to work with us.
Join our teamS08JM: 8-bit USB Cost-Effective JM MCUs
Overview
Features
Features
8-bit HCS08 Central Processing Unit (CPU)
- Up to 24 MHz internal bus (48 MHz HCS08 core) frequency offering 2.7 to 5.5V across temperature range of -40°C to +85°C
- Support for up to 32 peripheral interrupt/reset sources
On-Chip Memory
- Up to 60K flash read/program/erase over full operating voltage and temperature
- Up to 4K RAM
- 256 Byte USB RAM
Power-Saving Modes
- Wait plus two stop modes
- Multi-purpose clock generator (MCG)
Peripherals
- USB Device Module
- Analog comparators (ACMP)—Analog comparator with option to compare to internal reference
- Analog to digital converter (ADC)—12-channel, 12-bit resolution
- Two serial communications interface (SCI) modules offering asynchronous communications
- I2C with up to 100 kbps maximum bus loading
- multi-master operation
- programmable slave address
- interrupt driven byte-by-byte data transfer
- supports broadcast mode and 10-bit addressing
- SPI—Two serial peripheral interfaces with full-duplex or single-wire bidirectional
- double-buffered transmit and receive
- master or slave mode;
- MSB-first or LSB-first shifting
- Timer pulse width modulation (TPM)—Up to eight channels
Input/Output
- Up to eight keyboard interrupt (KBI) pins with selectable polarity
- 51 general-purpose input/outputs (GPIO) and one input-only and one output-only pin
System Protection
- Watchdog computer operating properly (COP) reset
- option to run from dedicated 1 kHz internal clock source or bus clock
- Low-voltage detection with reset or interrupt
- selectable trip points
- Illegal op code detection with reset
- Flash block protection
Hardware Development Support
- Single-wire background debug interface
- Breakpoint capability
- On-chip in-circuit emulator (ICE) debug module
Development Boards and Designs
Development Boards and Designs
DEVKIT-S12XE:Development Board for 9S12XEP100 MCU Evaluation
DEMOJM:Flexis JM Demonstration Board
DEMOFLEXISJMSD:Flexis JM board with SD Card drivers and USB connectivity
DEVKIT-S12G128:Development Board for S12G128 MCU Evaluation 
DEVKIT-S12VR64:Development Board for S12VR64 MCU Evaluation
DEVKIT-S12ZVC:Development Board for 9S12ZVCA192 MCU Evaluation
DEVKIT-S12ZVL:Development Board for 9S12ZVL32 MCU Evaluation .
Target Applications
Industrial
- Anesthesia Unit Monitor
- Blood Glucose Management
- Heart Monitors
- Home Health Gateway
- Hospital Admission Machine
- Powered Patient Beds
- Smart Power Socket and Light Switch
- Vital Signs Monitors
