32-Bit Microcontrollers with USB

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Built on the ColdFire^® V2 core, the MCF5222x family offers up to 76 MIPS (Dhrystone 2.1) at 80 MHz. It builds on the successful MCF5213 family by integrating a USB host and on-the-go (OTG) controller, making it ideal for applications requiring device or host connectivity functionality. The MCF5222x microcontrollers are aimed at designers who want the power and flexibility of a 32-bit microcontroller plus a rich set of on-chip peripherals at a low cost. These small, highly integrated microcontrollers open the door to expanding application capabilities while driving down total system costs.

The MCF5222x family targets embedded control applications such as industrial control, home/factory automation, point-of-sale, health care-related and testing equipment, as well as consumer applications.

The MCF52223 is pin-to-pin compatible with the MCF52221 (in like packages) and adds 16 KB of SRAM and an extra 128 KB of flash to the standard MCF5222x peripheral set.

Data Sheet

Reference Manual

Product Details

Block Diagram

ColdFire MCF5222X Microcontroller Block Diagram

Get diagram PDF

Features

ColdFire^® V2 core delivering 76 (Dhrystone 2.1) MIPS at 80 MHz
Up to 32 KB SRAM
Up to 256 KB flash
Integrated peripherals
- USB 2.0 low/full-speed OTG controller
- Three universal asynchronous receiver/transmitters (UARTS)
- MAC module and hardware divide
- Queued serial peripheral interface (QSPI)
- I²C
- Four-channel 16-bit capture/compare/pulse width modulated (PWM) timers
- Real-time clock
- Up to 56 general-purpose input/outputs (GPIOs)
Complimentary MQX Software Solutions

Design Resources

Hardware

5 hardware offerings

^{Emulators, Probes, and Programmers}
USB ColdFire MultlinkFeatured

USBMLCF
^{Evaluation and Development Boards}
MCF52223 Evaluation BoardFeatured

M52223EVB
^{Emulators, Probes, and Programmers}
Universal Multilink FX High-Speed Development Interface

U-MULTILINK-FX
Additional hardware available. View our featured partner solutions.
^{Emulators, Probes, and Programmers}
ColdFire^® Flash Programmer (Cfflasher)

CFFLASHER
^{Evaluation and Development Boards}
MPC5646C Devlce and Target Adapters

MPC5646C-DB

1-5 of 6 hardware offerings

^{Test Accessories and Debugger}
USB Multilink Universal FX

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSCdevices. Supports SWO ...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
CYCLONE LC

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-control...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
USB Multilink Universal

USB Multilink Universal is an all-in-one BDM/JTAG debug probe Kinetis, LPC, i.MX RT, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4, MPC5xxx, DSC. Sup...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
Green Hills Probe

High speed on-chip download, run control and trace.

By Green Hills Software Platinum Partner
^{Test Accessories and Debugger}
CYCLONE FX

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debug, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Sta...

By P & E Microcomputer Systems, Inc Gold Partner
^{Complementary Silicon or Component}
NOR Flash

Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash suppor...

By Micron Gold Partner