Absolute Digital Pressure Sensor (20 to 110 kPa)

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Roll over image to zoom in

The MPL3115A2S and MPL3150A2S are the recommend devices for new designs as the MPL3115A2 and MPL3150A2 are discontinued.

The MPL3115A2 is a compact piezoresistive absolute pressure sensor with an I²C interface.
MPL3115 has a wide operating range of 20 kPa to 110 kPa, a range that covers all surface elevations on Earth.
The fully internally compensated MEMS in conjunction with an embedded high resolution 24-bit equivalent ADC provide accurate pressure [Pascals] /altitude [meters] and temperature [degrees Celsius] data. The internal processing in MPL3115A2 removes compensation and unit conversion load from the system MCU, simplifying system design.

MPL3115A2’s advanced ASIC has multiple user programmable modes such as power saving, interrupt and autonomous data acquisition modes, including programmed acquisition cycle timing, and poll-only modes. Typical active supply current is 40 uA per measurement-second for a stable 10 cm output resolution.

Product Details

Block Diagram

MPL3115A2 Block Diagram

Get diagram PDF

Features

Key Features

Calibrated range: 50 kPa to 110 kPa absolute pressure
Operating range: 20 kPa to 110 kPa absolute pressure
I²C digital output interface (up to 400 kHz)
Fully compensated internally
Programmable Interrupts
1.95 V to 3.6 V Supply Voltage, internally regulated
1.6 V to 3.6 V Digital Interface Supply Voltage
Operating temperature from -40 °C to +85 °C
5 mm x 3 mm x 1.1 mm LGA package (1.25 mm lead pitch)
MSL 1 compliant

Direct Reading

Pressure: 20-bit measurement [Pascals]
Altitude: 20-bit measurement [meters]
Temperature: 12-bit measurement [degrees Celsius]

Autonomous Data Acquisition

Embedded 32-Sample FIFO
Data logging up to 12 days using the FIFO
1 second to 9 hour data acquisition rate

Product Longevity Program

This product is included in the NXP Product Longevity program with assured supply for a minimum of 10 years after launch

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Documentation

Quick reference to our documentation types.

Design Resources

Hardware

Quick reference to our board types.

1-5 of 7 hardware offerings

Evaluation and Development Boards
Sensor Toolbox Development Platform for MPL3115A2 Pressure/Altimeter Sensor Featured

FRDMSTBC-P3115
Complete Solution
NXP Rapid IoT Prototyping Kit

IOT-PROTOTYPING
Complete Solution
PX4 Robotic Drone Vehicle/Flight Management Unit (VMU/FMU) - RDDRONE-FMUK66

RDDRONE-FMUK66
Additional hardware available. View our featured partner solutions.
Complete Solution
Mobile Robotics Buggy3 Kit Including RDDRONE-FMUK66 and Peripherals

MR-BUGGY3
Design Concept
Battery Powered Portable Device Design Based on i.MX 8ULP

BP-IMX8PULP-POC
Evaluation and Development Boards
NXP HoverGames drone kit including RDDRONE-FMUK66 and peripherals

KIT-HGDRONEK66
Evaluation and Development Boards
Evaluation Kit for MCX N94x MCUs

MCX-N9XX-EVK

Show All

4 hardware offerings

Evaluation and Development Boards
Hexiwear

Compact, wearable cool form factor Style and usability of a high-end consumer device in a dev kit. Efficiency and low power consumption. Powered by Kinetis K64 32-bit ARM...

By MIKROE Gold Partner
Evaluation and Development Boards
Accel&Pressure Click

Accel&Pressure Click is a compact add-on board representing a rate-of-climb sensing solution for your application, wtih a 3-axis low-g accelerometer, and precision pressu...

By MIKROE Gold Partner
Evaluation and Development Boards
Altitude click

Altitude Click features a MEMS pressure sensor MPL3115A2, which provides accurate pressure/altitude (20-bit) and temperature (12-bit) data. Resolution is down to 30 cm (1...

By MIKROE Gold Partner
Evaluation and Development Boards
Click boards - Sensors

If you want to add some Sensors to your product such as Motion, Pressure and Temp to your device, then Click boards will do the work. These boards can be accessed over a ...

By MIKROE Gold Partner

To find additional partner offerings that support this product, visit our Partner Marketplace.

Engineering Services

To get further assistance directly from NXP, please see our Engineering Services.

1 engineering service

^{Original Design Manufacturer (ODM)}
Hardware and Software Engineering Services

By VVDN Technologies GoldHQ: Gurgaon, IndiaSupporting Regions: APAC, EMEA, Americas

To find additional partner offerings that support this product, visit our Partner Marketplace.

Absolute Digital Pressure Sensor (20 to 110 kPa)