Freedom Development Platform for Kinetis® KV1x Family 128 KB, 64 KB, 32 KB and 16 KB Flash MCUs

FRDM-KV11Z

Roll over image to zoom in

The FRDM-KV11Z is a low-cost development tool for the Kinetis® V series KV1x MCU family built on the Arm® Cortex®-M0+ processor. The FRDM-KV11Z hardware is form-factor compatible with the Arduino® Rev3 pin layout, providing a broad range of expansion board options. The FRDM-KV11Z platform features OpenSDA, the NXP® open source hardware embedded serial and debug adapter running an open source bootloader. This circuit offers several options for serial communication, flash programming, and run-control debugging.

Product Details

Select a section:

Supported Devices

Processors and Microcontrollers

KV Series Cortex-M4/M0+/M7

  • KV1x: Kinetis® KV1x-75 MHz,  Entry-Level 3ph FOC / Sensorless Motor Control MCUs based on Arm® Cortex®-M0+

Features

Microcontroller

    MKV11Z128VLF7 MCU

    • Arm® Cortex®M0+ 75 MHz
    • 128 kB Flash, 16 kB SRAM
    • 1xFlexCAN, 16-bit ADC, and FlexTimers with quadrature decoder dedicated to motor and power control
    • 48 LQFP

Connectivity

  • Motor control auxiliary connector
  • Form factor compatible with Arduino Rev3 pin layout

Power Management

  • Power selectable 3.3 V/1.8 V

Debug

    New, OpenSDA debug interface from P&E

  • FRDM-KV11Z Mass storage device flash programming interface (default) – no tool installation required to evaluate demo apps
  • P&E Debug interface provides run-control debugging and compatibility with IDE tools

Sensors

  • Six-axis sensor combining accelerometer and magnetometer (FXOS8700CQ)
  • Thermistor sensor to measuring temperature

Support & Software

  • Enabled with MCUXpresso IDE and SDK software solution and Freemaster and MCAT – Motor Control Application Tuner that enables configuration of motor drive systems for BLDC and PMSM type motors
  • FlexCAN I/O supported

Components

  • Tri-color user-controllable LEDs
  • User controlled push-button switches

 Jump Start Your Design

Start Here! Getting Started on your FRDM-KV11Z

This page will help guide you through the process of learning about your FRDM-KV11Z board...

MCUXpresso Software and Tools

MCUXpresso

Buy Options

  • FRDM-KV11Z

  • FRDM-KV11Z.

    • FRDM-KV11Z Freedom Development Platform
    • Quick Start Guide
    • USB A-to-MicroB cable
  • $28.75 USD
  • For a quantity of 1
    • Availability: Pending stock
Buy from NXPBuy From Distributor

Documentation

Quick reference to our documentation types.

Filters

1-5 of 7 documents

Show All

Design Resources

Select a section:

Design Files

Filters

2 design files

Software

Filters

1 software file

Note: For better experience, software downloads are recommended on desktop.

Support

What do you need help with?

Search