GreenChip SMPS Control IC

Roll over image to zoom in

Block Diagram

TEA1833TS Block Diagram

TEA1833TS Block Diagram


Key Features

  • SMPS controller IC enabling low-cost applications
  • Large input voltage range (10.5 V to 36 V)
  • Integrated OverVoltage Protection (OVP) on the VCC pin
  • Accurate OverVoltage Protection (OVP) via the ISENSE pin
  • Dedicated burst mode, allowing a low VCC capacitor value
  • Very low supply current during start-up and restart (11 µA typical)
  • Low supply current during normal operation (0.58 mA typical without load)
  • Adaptive internal overpower time-out
  • Overpower protection including high/low line compensation
  • Fixed switching frequency with frequency jitter to reduce EMI
  • Frequency reduction with fixed minimum peak current to maintain high efficiency at low output power levels
  • Peak power operation up to 200 % by frequency increase and peak current increase
  • Slope compensation for CCM operation
  • Limitation of switching frequency at high mains to reduce the maximum drain voltage
  • Integrated soft-start
  • Drive capability 300 mA source, 750 mA sink
  • Maximum duty cycle set at 90 %
  • Mains Undervoltage protection (brownin/brownout)
  • Output Short Circuit Protection (OSCP), avoiding transformer saturation
  • External OverTemperature Protection (OTP)
  • IC overtemperature protection
  • Internal VCC OVP, external OVP, internal OTP, and external OTP are latched protections; all other protections cause a restart

NXP GreenChip

  • This product is part of the NXP GreenChip portfolio, this program optimizes for energy efficiency in mobile and computing applications, specializing in high-power density, safety and reliability.

Part numbers include: TEA1833TS.


Quick reference to our documentation types.

1-5 of 8 documents

Show All


Quick reference to our board types.

1 hardware offering


What do you need help with?