8-bit LCD for Battery-Powered and Handheld LC MCUs
Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
8-bit Segment LCD LL MCUs
The S08LL 8-bit segment LCD microcontroller family is ideal for battery-powered applications such as medical diagnostics or handheld appliances. The S08LL family extends battery life with comprehensive low-power technology, speeds development time and eliminates excess cost with its complete tower ecosystem.
Product Details
Block Diagram
Features
S08 Central Processor Unit (CPU)
- Up to 40 Mhz CPI at 3.6V to 2.1V
- Up to 20 MHz CPU at 2.1V to 1.8V across temperature range of -40°C to +85°C
- HCS08 instruction set with added BGND instruction
Enablement and Development Support
- Low-cost, reconfigurable Tower® evaluation and demonstration platform
- Breakpoint capability
-
ICE debug module
- three comparators and nine trigger modes
- Eight deep FIFO for storing change-of-flow addresses and event-only data
- supports both tag and force breakpoints.
- Migration path from smaller flash size devices (LL16)
Power-Saving Features
- Two ultra-low-power stop modes, one of which allows limited use of peripherals
- New low-power run and wait modes
- 6 µs typical wake-up time from stop mode
- Internal clock source (ICS) module containing a frequencylocked loop (FLL) controlled by internal or external reference
- Ultra-low-power oscillator (OSC)
- Clock gating disables clocks to unused peripherals
LCD Driver and Internal Charge Pump
- Integrated LCD driver supports both standard 3V and 5V LCD glass
- Configurable display for 8 x 36 or 4 x 40 segment display
- Low-power blinking mode
- Internal charge pump
- Front plane (FP) and back plane (BP) re-assignments
- Capable of running in STOP3 and STOP2 mode
- LCD driver pins are muxed with GPIO and other functions
On-Chip Memory
- Up to 64 KB flash compromised of two separate arrays to facilitate read/program/erase over full operating voltage and temperature
- 1.8V to 3.6V RAM
Peripherals
-
Analog-to-digital converter (ADC)
- Up to 10-channel
- 12-bit resolution
- 2.5 µs conversion time
- Automatic compare function
- Internal temperature sensor
- Internal bandgap reference channel
- Operation in stop mode
-
Timer
- Two 2-channel (TPM1 and TPM2)
- Selectable input capture
- Output compare
- Buffered-edge or center-aligned PWM on each channel
-
Two serial communications interfaces (SCI)
modules
- Asynchronous communications
- 13-bit break option
- Flexible baud rate generator
- Double buffered transmit and receive and optional HW parity checking and generation
-
Time of day (TOD) 8-bit
- Quarter second counter with match register
- External clock source for precise time base
- Calendar
- Task scheduling functions
-
Serial peripheral interface (SPI) module
- Full-duplex or single-wire bidirectional
- Double-buffered transmit and receive leader or follower mode
- MSB-first or LSB first shifting
-
I²C with up to 100 kbps with maximum bus
loading
- Multicontroller operation
- Programmable target address
- Interruptdriven byte-by-byte data transfer
- Support for broadcast mode and 10-bit addressing
Input/Output
- Up to 39 general purpose input/output (GPIO)
- Two output-only pins
- Eight keyboard interrupt (KBI) pins with selectable polarity
System Protection
- Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
- Low-voltage detection with reset or interrupt, selectable trip points
- Illegal op code and illegal address detection with reset
- Flash block protection
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types
1-10 of 41 documents
Compact List
Application Note (15)
-
M68HC08 to HCS08 Transition[AN2717]
-
Migration Guide from S08 to Kinetis L Series MCUs[AN4662]Featured
Application Note Software (1)
-
Software to accompany AN3796[AN3796SW]
Brochure (1)
Data Sheet (2)
-
MC9S08LL16 Series - Data Sheet[MC9S08LL16]Featured
-
MC9S08LL64 Series - Data Sheet[MC9S08LL64]Featured
Errata (2)
-
Mask Set Errata: 1M60K - Errata[MSE9S08LL16_1M60K]
-
Mask Set Errata: 0M46S - Errata[MSE9S08LL64_0M46S]
Fact Sheet (3)
-
MC9S08LC Family Fact Sheet[MC9S08LC60FS]
-
MC9S08LL16/8 Fact Sheet[MC9S08LL16FS]Featured
-
MC9S08LL64/36 - Fact Sheet[DEMO9S08LL6436FS]Featured
Product Change Notice (2)
Reference Manual (3)
-
HCS08 Family Reference Manual[HCS08RMV1]
-
MC9S08LL16, MC9S08LL8 - Reference Manual[MC9S08LL16RM]Featured
-
MC9S08LL64 Reference Manual: Covers LL64 and LL36[MC9S08LL64RM]Featured
Reliability and Quality Information (3)
-
VDE IEC 60730 Class B test report for the MC9S08 MCU[VDE_S08_CLASSB_TEST_REPORT]
-
Tuev IEC 60730 SRAM test certificate for MC9S08 controller[TUEVCERTIFICATIONWALKPATRAM]
-
Tuev IEC 60730 CPU test certificate for MC9S08 controller[TUEVCPUCLASSCCERT]
Selector Guide (1)
-
S08 MCU Linecard[HSC08-LINECARD]
Supporting Information (1)
-
TWRS098LL64LAB1 Lab Tutorials[TWRS098LL64LAB1]
Technical Notes (3)
User Guide (2)
White Paper (2)
-
Practical Power Comparison: MC9S08LL16 offers 70 percent reduction[S08LL16PWRCMPWP]
-
Our Next Generation 8-bit LCD Solutions[LFAMLCDWP]
Design Resources
Software
Quick reference to our software types.
4 software offerings
-
BSPs and Device Drivers
emWin (GUI/Graphics Package)
-
BSPs and Device Drivers
emFile (File System)
-
OS and RTOS
embOS (RTOS)
-
Development IDEs and Build Tools
winIDEA
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
4 engineering services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
-
Independent Design House (IDH)
Embedded firmware consulting
-
Independent Design House (IDH)
Hardware/Software development and testing
.svg)
-
Independent Design House (IDH)
EMI/EMC Assessment and compliance
To find additional partner offerings that support this product, visit our Partner Marketplace.