For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

NTAG^® 5 Link: NFC Forum-Compliant I²C Bridge for IoT on Demand

Overview

Please check the new online NFC Antenna Tool for tag and reader devices.

NXP’s NTAG 5 link lets designers of sensor-equipped systems add an NFC interface with a wired host interface that’s configurable as an I²C controller/target, a Pulse Width Modulator (PWM), or a General-Purpose I/O (GPIO). Operating at 13.56 MHz, it is an NFC Forum-compliant contactless tag that can be read and written by an NFC-enabled device at close range and by an ISO/IEC 15693-enabled industrial reader over a longer range.

Commitment to Longevity

NTP53x21G0J is ready to support your development today, tomorrow and beyond through its longevity program. The Product Longevity program ensures a stable supply of products for your embedded designs

Learn more

MoreLess

Features

Key Features

AES mutual authentication
I²C target and controller channel
GPIO and PWM
Energy harvesting with configurable output up to 30 mW

NFC Interface

Fully NFC Forum Type 5 Tag compliant
8-byte Unique Identifier
32-byte reprogrammable originality signature

Host Interface

I²C controller and target interface supports up to 400 kHz
2 GPIO’s
2 Pulse Width Modulation output channel
Event Detection pin

Scalable Security

AES 128-bit mutual authentication
32/64-bit password protection
Read-only locking
NFC silence
3 configurable user memory areas
ECC-based reprogrammable originality signature

Memory

2048 bytes user memory
256 bytes SRAM

MoreLess

Features

Key Features

AES mutual authentication
I²C target and controller channel
GPIO and PWM
Energy harvesting with configurable output up to 30 mW

NFC Interface

Fully NFC Forum Type 5 Tag compliant
8-byte Unique Identifier
32-byte reprogrammable originality signature

Host Interface

I²C controller and target interface supports up to 400 kHz
2 GPIO’s
2 Pulse Width Modulation output channel
Event Detection pin

Scalable Security

AES 128-bit mutual authentication
32/64-bit password protection
Read-only locking
NFC silence
3 configurable user memory areas
ECC-based reprogrammable originality signature

Memory

2048 bytes user memory
256 bytes SRAM

NTAG 5 link block diagram

Battery-Less Smart Gym Band Using Motion Sensors and NTAG5 Link

NTAG 5 link block diagram
Battery-Less Smart Gym Band Using Motion Sensors and NTAG5 Link

NTAG 5 link block diagram

Battery-Less Smart Gym Band Using Motion Sensors and NTAG5 Link

Previous Next

Development Boards and Designs

NTAG^® 5 family Demo Kit

Evaluation and Development Boards

OM2NTX5332 : NTAG<sup>®</sup> 5 development kits thumbnail

OM2NTX5332:NTAG^® 5 development kits

Evaluation and Development Boards

Development Boards and Designs

NTAG^® 5 family Demo Kit

Evaluation and Development Boards

OM2NTX5332:NTAG^® 5 development kits

Evaluation and Development Boards

Target Applications

Communication Infrastructure

IoT on demand

Mobile

Power Adapters and Chargers

Comparison Table

Feature	NTAG 21xF	NTAG 5 switch	NTAG I²C plus	NTAG 5 link	NTAG 5 boost
NFC Forum type tag	2	5	2	5	5
Max. interface speed - NFC/I²C	106 kbps/-	53 kbps/-	106 kbps/400 kHz	53 kbps/400 kHz	53 kbps/400 kHz
Memory size	144 or 888 bytes	512 bytes	888 or 1912 bytes 64 bytes SRAM	2048 bytes 256 bytes SRAM	2048 bytes 256 bytes SRAM
Memory protection from NFC perspective	Read only locking and 32-bit PWD	Read only locking and 32- or 64-bit PWD	Read only locking and 32-bit PWD	Read only locking and 32- or 64-bit PWD AES mutual authentication*	Read only locking and 32- or 64-bit PWD or AES mutual auth.
Memory protection from connected host	-	-	Restrict access to NFC password protected area	32-bit PWD	32-bit PWD
Memory areas	2	3	2	3	3
Originality Signature	fixed	re-programmable	fixed	re-programmable	re-programmable
Energy harvesting	-	regulated up to 30 mW	yes up to 15 mW	regulated up to 30 mW	when used as passive regulated up to 30 mW
Wired Interface	Field Detect Pin	PWM, GPIO; Event Detect Pin	I²C target; Event Detect Pin	PWM; GPIO; I²C target, I²C transparent controller*; Event detection	PWM; GPIO; I²C target, I²C transparent controller; Event detection
Typical stand-by and hard-power-down values	-	6 µA/0,25 µA	-	6 µA/0,25 µA	10 µA/0,25 µA
Active load modulation	-	-	-	-	yes, when VCC supplied
Temperature range	-25°C to +70°C	-40°C to +85°C	-40°C to +105°C	-40°C to +85°C	-40°C to +85°C