For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

S12HY: S12HY Scalable Value Line Cluster Solutions Microcontrollers (MCUs) with CAN

Overview

The S12HY family of CAN MCUs offers enhanced 16-bit performance and customized features, such as LCD driver and stepper motor driver, for cost-effective instrument cluster applications—helping you design for emerging markets in the automotive industry.

MoreLess

Features

HCS12 CPU core, 32 MHz bus frequency
Up to 64 KB on-chip flash with ECC
4 KB data flash with ECC
Up to 4 KB on-chip SRAM
LCD driver, configurable up to 40 x 4
Stepper motor controller with up to four drivers
Phase-locked loop (PLL) frequency multiplier with internal filter
4–16 MHz amplitude controlled Pierce oscillator
1 MHz internal RC oscillator
Two timer modules (TIM1 and TIM2) supporting input/output channels that provide a range of 16-bit input capture, output compare, counter and pulse accumulator functions
Pulse width modulation (PWM) module with up to eight 8-bit channels
Up to 8-channel, 10-bit resolution successive approximation analog-to-digital converter (ADC)
Serial peripheral interface (SPI) module
Serial communication interface (SCI) module supporting LIN 2.0, 2.1 and SAE J2602 communications
One inter-integrated circuit (I²C) module
One multi-scalable controller area network (MSCAN) module (supporting CAN protocol 2.0 A/B)
On-chip voltage regulator (Vreg) for regulation of input supply and all internal voltages
Autonomous periodic interrupt (API)
This product is included in NXP product longevity program, with assured supply for a minimum of 15 years after launch

MoreLess

Features

HCS12 CPU core, 32 MHz bus frequency
Up to 64 KB on-chip flash with ECC
4 KB data flash with ECC
Up to 4 KB on-chip SRAM
LCD driver, configurable up to 40 x 4
Stepper motor controller with up to four drivers
Phase-locked loop (PLL) frequency multiplier with internal filter
4–16 MHz amplitude controlled Pierce oscillator
1 MHz internal RC oscillator
Two timer modules (TIM1 and TIM2) supporting input/output channels that provide a range of 16-bit input capture, output compare, counter and pulse accumulator functions
Pulse width modulation (PWM) module with up to eight 8-bit channels
Up to 8-channel, 10-bit resolution successive approximation analog-to-digital converter (ADC)
Serial peripheral interface (SPI) module
Serial communication interface (SCI) module supporting LIN 2.0, 2.1 and SAE J2602 communications
One inter-integrated circuit (I²C) module
One multi-scalable controller area network (MSCAN) module (supporting CAN protocol 2.0 A/B)
On-chip voltage regulator (Vreg) for regulation of input supply and all internal voltages
Autonomous periodic interrupt (API)
This product is included in NXP product longevity program, with assured supply for a minimum of 15 years after launch