Hardware
Quick reference to our
board types.
1 hardware offering
-
Evaluation and Development BoardsEvaluation Kit - 33887, Inductive Load DriverFeatured
H-Bridge, Brushed DC Motor Driver, 5-28 V, 5 A, 10 kHz
The NXP® MC33887 is a monolithic H-Bridge power IC with a load current feedback feature making it ideal for closed-loop DC motor control.
- The IC incorporates internal control logic, charge pump, gate drive, and low RDS(ON) MOSFET output circuitry
- Able to control inductive loads with continuous DC load currents up to 5.0 A, and with peak current active limiting between 5.2 A and 7.8 A
- Output loads can be pulse width modulated at frequencies up to 10 kHzdervoltage, overtemperature, and overcurrent conditions are detected and reported via a status flag output
- The load current feedback feature provides a proportional constant-current output suitable for monitoring by a MCU’s A/D input, which facilitates the design of closed-loop torque/speed control as well as open load detection
Product Details
Features
Key Features
- Fully specified operation 5.0 V to 28 V
- Limited operation with reduced performance up to 40 V
- 120 mΩ RDS(ON) typical H-Bridge MOSFETs
- TTL/CMOS compatible inputs
- PWM frequencies up to 10 kHz
- Active current limiting (regulation)
- Fault status reporting
- Sleep mode with current draw ≤50 μA (inputs floating or set to match default logic states)
- Polarity control through two independent inputs
- Exhibit high-impedance through two disable inputs
- Load supply voltage min. 5 V, max. 28 V
- Parallel interface and input control
- Ambient operating temperature -40 to 125 °C
Product Longevity Program
- This product is included in the NXP Product Longevity Program ensuring a stable supply of products for your embedded designs. The MC33887 is included in the 15-year program
Part numbers include: MC33887APVW, MC33887PEK, MC33887PFK, MC33887PNB.
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-5 of 8 documents
-
Application Note
AN2409, Small Outline Integrated Circuit (SOIC) Package - Application NoteFeatured
-
Application Note
AN2388, Heatsink Smal Outline Package (HSOP)Featured
-
Application Note
AN2467, Power Quad Flat No-Lead (PQFN) Package - Application NoteFeatured
-
Data Sheet
MC33887, 5.0 A H-Bridge with Load Current Feedback - Data SheetFeatured
Design Resources
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
1 engineering service
-
Independent Design House (IDH)
Hardware/Software Engineering Services
To find additional partner offerings that support this product, visit our Partner Marketplace.