i.MX RT1010

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Roll over image to zoom in

i.MX RT1010 Crossover MCUs are based on the Arm^® Cortex^®-M7 core for real-time performance and high integration for Industrial and IoT applications.

The i.MX RT1010 CM7 operates at up to 500 MHz with 128 KB on-chip RAM that can be configured as TCM or general-purpose. The family offers various memory interfaces and a wide range of connectivity interfaces including UART, SPI, I²C, and USB. 80 LQFP packages included for low-cost PCB designs.

The i.MX RT1010 family is supported by the MCUXpresso ecosystem, which includes an SDK, a choice of IDEs and secure provisioning and configuration tools to enable rapid development.

Data Sheet

Reference Manual

Product Details

Block Diagram

i.MX RT1010 Crossover MCU

Get diagram PDF

Features

Arm^® Cortex^®-M7 up to 500 MHz
Real-time, low-latency response as low as 20 ns
MCUXpresso ecosystem support
- Selection of IDE choices
- Pin, clock, peripheral, security and memory Config tools
- Security programming and provisioning tools
- Software Development Kit
Zephyr RTOS support
External memory interface options
80 LQFP packages for low-cost PCB designs

Design Resources

Design Files

2 design files

^Models
BSDL file for i.MX RT1010

BSDLRev 0Jan 30, 2023 16:00:0013.1 KB80LQFP

Download
^Models
IBIS Model file for i.MX RT1010

IBSRev 0Jan 30, 2023 16:08:0020.5 MB80LQFP-IBIS

Download

Hardware

2 hardware offerings

^{Evaluation and Development Boards}
i.MX RT1010 Evaluation KitFeatured

MIMXRT1010-EVK
^{Emulators, Probes, and Programmers}
LPC-Link2

OM13054

1-5 of 26 hardware offerings

^{Test Accessories and Debugger}
J-Link PLUS

JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in t...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
J-Link BASE

Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other ...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
Flasher Compact

Flasher Compact is the compact twin to the Flasher PRO, primarily designed for installation into production rigs or automated test equipment (ATE) where production space ...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
Flasher ARM

In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
Flasher Hub-12

The Flasher Hub-12 controls up to 12 Flasher Compacts so that they program simultaneously, creating a powerful gang programmer for efficient high-speed parallel programmi...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
I-jet

I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is full...

By IAR Platinum Partner
^{Test Accessories and Debugger}
J-Link PRO PoE

J-Link PRO PoE is SEGGER's specialized programming / debug probe for creating test farms. It can draw power via Ethernet and supplies power to the target either via debug...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
J-Link PRO

J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This ...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
TRACE32® CombiProbe 2 Compact Trace for NXP Microcontrollers

CombiProbe 2 enables full insight into what an embedded system is doing at run-time. Besides its comprehensive debug capabilities, the trace simplifies system profiling o...

By Lauterbach GmbH Gold Partner
^{Test Accessories and Debugger}
Flasher ATE

Flasher ATE is perfectly suited for high volume mass production environments.

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
Flasher Secure

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the program...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
J-Trace PRO Cortex-M

J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace, lifting the limitations by internal buffers and slow data tran...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
J-Link ULTRA+

Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed ...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
Flasher Portable PLUS

Flasher Portable PLUS is an extremely portable flash programmer, specifically designed to meet the needs of production-grade flash programming in the field.

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
J-Trace PRO Cortex

J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface of J-Trace PRO Cortex enables continuous streaming trace via...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
J-Link WiFi

JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in ...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
J-Link EDU Mini

The J-Link EDU Mini is a stripped-down, budget-friendly model of the J-Link debug probe created for educational use. Even with its reduced size, it maintains most J-Link ...

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
Flasher PRO

Flasher PRO is SEGGER’s “almost-anything” flash programmer for microcontrollers, SoCs, and (Q)SPI flashes.

By SEGGER Microcontroller GmbH Gold Partner
^{Test Accessories and Debugger}
TRACE32® Debug and Trace tools for Arm®-based NXP MPUs/MCUs

TRACE32® provides a complete suite of tools for all NXP's Arm®-based microprocessors. All of these provide unparalleled levels of debug capabilities to get the best out o...

By Lauterbach GmbH Gold Partner
^{Test Accessories and Debugger}
Green Hills Probe

High speed on-chip download, run control and trace.

By Green Hills Software Platinum Partner
^{Test Accessories and Debugger}
TRACE32® PowerDebug System for NXP Microcontrollers/Microprocessors

PowerDebug is Lauterbach's powerful, modular, flexible debug system. It provides the broadest coverage of supported chips and core architectures in the embedded industry ...

By Lauterbach GmbH Gold Partner
^{Complementary Silicon or Component}
uSD-M.2 Adapter: Interconnect for NXP i.MX RT/6/7/8

uSD-M.2 adapter board provides out-of-box experience for NXP i.MX with Murata’s M.2 Module Family enabled by Embedded Artists; interfacing WLAN/BT-signals including WLAN-...

By Murata Manufacturing Co., Ltd. Gold Partner
^Module
LILY-W132-00B

Wi-Fi module base on NXP Wi-Fi chip 88W8801

By u-blox AG Gold Partner
^Module
LILY-W131-00B

Wi-Fi module base on NXP Wi-Fi chip 88W8801

By u-blox AG Gold Partner
^Module
MAYA-W166-01B

Compact Wi-Fi 4 + Bluetooth 5.2 host-based multiradio modules 1 antenna pin - Wi-Fi 2.4/5GHz and BT/BLE MAYA family dimensions and pin-out

By u-blox AG Gold Partner
^Module
MAYA-W166-00B

Compact Wi-Fi 4 + Bluetooth 5.2 host-based multiradio modules 1 embedded PCB antenna - Wi-Fi 2.4/5GHz and BT/BLE MAYA family dimensions and pin-out

By u-blox AG Gold Partner