MPC5668G|32-bit MCU|Gateway | NXP Semiconductors

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The NXP^® MPC5668G MCU for automotive gateway applications connects all the possible communication protocols you can find in a car at one single point.

Delivers the performance throughput needed to maintain real-time operation
Single-chip SoC solution offers a low cost and high EMC performance
Supports all automotive communication protocols currently available
Backed by a strong third-party ecosystem of tools and software to support development

Reference Manual

Product Details

Block Diagram

MPC5668G Block Diagram

MPC5668G Block Diagram

Features

Supports all automotive communication protocols currently available
Optimized for communication data management:
- 592 KB embedded RAM, split into two blocks to allow concurrent accesses by bus leaders
- Additional e200z0 core to pre-process incoming communication data from high-speed networks, such as FlexRay^TM and Ethernet
Single-chip SoC
This product is included in NXP^®.s product longevity program, with assured supply for a minimum of 15 years after launch

Design Resources

Design Files

1 design file

^Calculators
MPC56xx EEPROM Emulation Endurance Calculator

ZIPRev vBeta053Dec 17, 20129.1 MBMPC56XX_EEPROM_CALCULATOR

Download

Hardware

3 hardware offerings

^{Evaluation and Development Boards}
MPC5668G Vehicle Networking Evaluation KitFeatured

MPC5668GKIT
^{Emulators, Probes, and Programmers}
Universal Multilink FX High-Speed Development Interface

U-MULTILINK-FX
^{Evaluation and Development Boards}
MPC56xxDevice and Target Adapters

MPC56xxVXBOARDS

1-5 of 14 hardware offerings

^{Evaluation and Development Boards}
OSBDM_OSJTAG_RESOURCES

OSBDM/OSJTAG resource page, including links for OSBDM/OSJTAG virtual toolkit, firmware updates, driver downloads, design documents, and related information.

By P & E Microcomputer Systems, Inc Gold Partner
^{Evaluation and Development Boards}
OSBDM_OSJTAG_TOOLKIT

A set of Windows-based applications that function with the OSJTAG on NXP's tower board. Includes accelerometer, firmware updater, serial re-director, serial graph...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
Universal Access Device 3+ (UAD3+)

The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code c...

By PLS Development Tools Gold Partner
^{Test Accessories and Debugger}
TRACE32 JTAG/BDM Debugger for Power Architecture

Lauterbach has over 40 years of experience in making world class microprocessor development tools. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedde...

By Lauterbach Gold Partner
^{Test Accessories and Debugger}
TRACE32 Debug and Parallel NEXUS Trace for MPC5XXX

Lauterbach has over 40 years of experience in making world class microprocessor development tools. TRACE32 NEXUS for is a high-end debug and trace system for MPC5XXX with...

By Lauterbach Gold Partner
^{Test Accessories and Debugger}
Vitra-PPC

Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and...

By Ashling Microsystems Gold Partner
^{Test Accessories and Debugger}
CYCLONE FX

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
USB Multilink Universal FX

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC1...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
CYCLONE LC

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-control...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
USB Multilink Universal

The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX RT, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qori...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
Universal Access Device 2next (UAD2next

The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight ...

By PLS Development Tools Gold Partner
^{Test Accessories and Debugger}
Green Hills Probe

High speed on-chip download, run control and trace.

By Green Hills Software Platinum Partner
^{Test Accessories and Debugger}
Universal Access Device 2pro (UAD2pro)

The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfa...

By PLS Development Tools Gold Partner
^{Complementary Silicon or Component}
NOR Flash

Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash suppor...

By Micron Gold Partner

To find a complete list of our partners that support this product, please see our Partner Marketplace.

Support

What do you need help with?

Recommended Communities

Suggested Links