Audio
Interfaces
Peripherals and Logic
Power Management
Sensors
RF
RFID/NFC
Security and Authentication
Wireless Connectivity
Browse all products
Product Information
Application-Specific Products
NXP Community
Design ideas, demo videos, quality answers. Connect with NXP professionals and other knowledgeable designers ready to help.
Design Resources
Software, documentation, evaluation tools. The resources to build comprehensive solutions and accelerate your time to market.
Access our design resource library
Careers at NXP
We're always looking for passionate and talented people to work with us.
Join our teamKE06: Kinetis® KE06-48 MHz, Mainstream with CAN Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
Overview
Features
Features
Operating characteristics
- Voltage range: 2.7 to 5.5 V
- Flash write voltage range: 2.7 to 5.5 V
- Temperature range (ambient): -40 to 105°C
Performance
- Up to 48 MHz Arm® Cortex®-M0+ core
- Single cycle 32-bit x 32-bit multiplier
- Single cycle I/O access port
Memories and memory interfaces
- Up to 128 KB flash
- Up to 256 B EEPROM
- Up to 16 KB RAM
Clocks
- Oscillator (OSC) - loop-controlled Pierce oscillator, crystal or ceramic resonator range of 31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz
- Internal clock source (ICS) - internal FLL with internal or external reference, precision trimming of internal reference allowing 1% deviation across temperature range of 0 °C to 70 °C and 1.5% deviation across temperature range of -40 °C to 105 °C, up to 20 MHz
- Internal 1 kHz low-power oscillator (LPO)
System peripherals
- Power management module (PMC) with three power modes: run, wait, stop
- Low-voltage detection (LVD) with reset or interrupt, selectable trip points
- Watchdog with independent clock source (WDOG)
- Programmable cyclic redundancy check module (CRC)
- Serial wire debug interface (SWD)
- Bit manipulation engine (BME)
Security and integrity modules
- 64-bit unique identification (ID) number per chip
Human-machine interface
- Up to 71 general-purpose input/output (GPIO)
- Two 8-bit keyboard interrupt modules (KBI)
Analog modules
- One 16-channel 12-bit SAR ADC with internal bandgap reference channel, operation in Stop mode, optional hardware trigger (ADC)
- Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
Timers
- One 6-channel FlexTimer/PWM (FTM)
- Two 2-channel FlexTimer/PWM (FTM)
- One 2-channel periodic interrupt timer (PIT)
- One real-time clock (RTC)
- One pulse-width timer (PWT)
- One fast timer
Connectivity and Communications
- Three SCI (LIN capable)
- Two I²C compatibles with SMBus V2 features
- Two 8-bit SPI
- One CAN module
Development Boards and Designs
Development Boards and Designs
FRDM-KE06Z:Freedom Development Platform for Kinetis® KE06 MCUs.
Target Applications
Automotive
Industrial
- 3-Phase AC Induction Motor
- Air Conditioning (AC)
- Brushless DC Motor (BLDC) Control
- Building Safety
- Electricity Meter
- Gas Meter
- Heat Metering
- Motion Control and Robotics
- Motor Drives
- Permanent Magnet Synchronous Motor (PMSM)
- Smart Lighting
- Smart Power Socket and Light Switch
- Water Meter
Mobile
Smart Home
Complementary products for your application
Get Started
CodeWarrior for MCU 10.6
To setup your CodeWarrior development environment for Kinetis applications.
- Read the document below for download and installation instructions.
- Download and install the CW MCU v10.6 product.
- Download and install CW MCU v10.6 Update 1.0.0.