MPC563xM|32-bit MCU|Powertrain

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The MPC563xM MCU offers enhanced powertrain functionality for entry-level automotive and industrial applications. It also addresses the aggressive cost constraints of engine and transmission suppliers focused on emerging markets.

Supports engines up to four cylinders
Enables strict but affordable emission control and allows a three to five percent improvement of economy and power
Easy to assemble and inspect (infrared and X-ray technology not required)
Helps reduce costs through single linear power supply

Data Sheet

Reference Manual

Product Details

Block Diagram

MPC563XM Microcontroller Block Diagram

Features

General

40, 60 and 80 MHz options Power Architecture^®> e200z3 Core
Up to 1.5 MB flash with error correcting codes (ECC)
111 KB total SRAM
Variable gain amplifier
Decimation filter
This product is included in NXP product longevity program, with assured supply for a minimum of 10 years after launch

Timed I/O channels

32-channel eTPU2
16-channel eMIOS with unified channels

On-chip Emissions Control

Enables lower CO2 emissions by three to five percent for same amount of fuel
Allows fast development of “clean sheet” solutions to meet emissions legislation
Brings three to five percent improvement of economy and power via affordable emissions controls
No active external components required for on-chip knock system because of variable on-chip gain and sensor bias

MPC563xM Family Comparison Table

Product	Frequency	Flash	RAM	eTPU2	eMIOS	ADC	Package
MPC5634M	60 MHz, 80 MHz	1.5M	94	1x32ch	1x16ch	34ch dual 12-bit	144LQFP, 176LQFP, 208MAPBGA
MPC5633M	40 MHz, 60 MHz, 80 MHz	1M	64	1x32ch	1x16ch	32ch dual 12-bit	144LQFP, 176LQFP, 208MAPBGA
MPC5632M	40 MHz, 60 MHz	768K	48	1x32ch	1x8ch	32ch dual 12-bit	144LQFP

Design Files

1 design file

Clear all

^Calculators
MPC56xx EEPROM Emulation Endurance Calculator

ZIPRev vBeta053Dec 17, 20129.1 MBMPC56XX_EEPROM_CALCULATOR
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

1-5 of 13 hardware offerings

Clear all

^{Evaluation and Development Boards}
MPC563xM Engine Management Evaluation SystemFeatured

XPC563MKIT
^{Evaluation and Development Boards}
Evaluation Kit - MC33903BD5, SBC Gen2 with CAN and LINFeatured

KIT33903BD5EVBE
^{Evaluation and Development Boards}
Evaluation Kit for 33905D3 System Basis Chip Gen2 with CAN and LINFeatured

KIT33905BD3EVBE
Additional hardware available. View our featured partner solutions.
^{Evaluation and Development Boards}
MPC56xx shieldFeatured

XPC56xxMB2
^{Evaluation and Development Boards}
Evaluation Kit - 33905D5, SBC Gen2 with CAN and LINFeatured

KIT33905D5EKEVBE
^{Evaluation and Development Boards}
Evaluation Kit - MC33903BD3, SBC Gen2 with CAN and LINFeatured

KIT33903BD3EVBE
^{Emulators, Probes, and Programmers}
Universal Multilink FX High-Speed Development Interface

U-MULTILINK-FX
^{Emulators, Probes, and Programmers}
PEmicro Cyclone FX programmer

CYCLONE-FX
^{Adapters, Cables, Sockets}
MPC55xx Debug and Target Adapters

MPC55xxADAPTERS
^{Evaluation and Development Boards}
MPC563xM StarterTRAK Development Kit

TRK-MPC5634M
^{Evaluation and Development Boards}
MPC563xM Device and Target Adapters

MPC563xMVBBOARDS
^{Evaluation and Development Boards}
MPC5646C Devlce and Target Adapters

MPC5646C-DB
^{Evaluation and Development Boards}
MPC56xxDevice and Target Adapters

MPC56xxVXBOARDS

Show All

1-5 of 15 hardware offerings

Clear all

^{Evaluation and Development Boards}
OSBDM_OSJTAG_RESOURCES

OSBDM/OSJTAG resource page, including links for OSBDM/OSJTAG virtual toolkit, firmware updates, driver downloads, design documents, and related information.

By P & E Microcomputer Systems, Inc Gold Partner
^{Evaluation and Development Boards}
OSBDM_OSJTAG_TOOLKIT

A set of Windows-based applications that function with the OSJTAG on NXP's tower board. Includes accelerometer, firmware updater, serial re-director, serial graph...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
Universal Access Device 3+ (UAD

The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code c...

By PLS Development Tools Gold Partner
^{Test Accessories and Debugger}
TRACE32 JTAG/BDM Debugger for P

Lauterbach has over 40 years of experience in making world class microprocessor development tools. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedde...

By Lauterbach Gold Partner
^{Test Accessories and Debugger}
TRACE32 Debug and Parallel NEXU

Lauterbach has over 40 years of experience in making world class microprocessor development tools. TRACE32 NEXUS for is a high-end debug and trace system for MPC5XXX with...

By Lauterbach Gold Partner
^{Test Accessories and Debugger}
Vitra-PPC

Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and...

By Ashling Microsystems Gold Partner
^{Test Accessories and Debugger}
SuperTrace Probe

Gather trace data from NXP ARM, Power Architecture and ColdFire.

By Green Hills Software Platinum Partner
^{Test Accessories and Debugger}
CYCLONE FX

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
USB Multilink Universal FX

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC1...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
CYCLONE LC

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-control...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
USB Multilink Universal

The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX RT, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qori...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
Universal Access Device 2next (

The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight ...

By PLS Development Tools Gold Partner
^{Test Accessories and Debugger}
Green Hills Probe

High speed on-chip download, run control and trace.

By Green Hills Software Platinum Partner
^{Test Accessories and Debugger}
Universal Access Device 2pro (U

The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfa...

By PLS Development Tools Gold Partner
^{Complementary Silicon or Component}
NOR Flash

Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash suppor...

By Micron Gold Partner