Automotive Dual Buck Regulator and Controller with Voltage Monitors and Watchdog Timer

FS5600 Active

Roll over image to zoom in

The FS56 System Basis Chip (SBC) for Automotive features a battery connected DC-DC buck controller with external FET and a battery connected DC-DC buck controller with internal FET.

In addition, it offers functional safety features such as independent voltage monitors, windowed watchdog timer, I/O monitoring via ERRMON and FCCU and built-in-self test. The FS56 is offered in QM, ASIL B and Enhanced ASIL B versions.

The FS56 offers highly configurable General Purpose Input/Outputs for seamless operation with PF PMICs as PF8x, PF7x and PF5x families.

The FS56 presents an optimized architecture for automotive with low-power modes and EMC minimizing as spread spectrum, frequency tuning and synchronization.

Block Diagram

FS56 Block Diagram

FS56 Block Diagram
Get diagram PDF

Features

Power Management

  • 2 x High-Voltage Buck Converters:
  • HV Buck Controller - External FETs – up to 15A load
  • 3 A HV Buck Regulator – Internal FETs - η = 93% @ 3A
  • +/- 2% Output Accuracy
  • 250 kHz to 3 MHz switching frequency
  • High-Efficiency PFM Mode (700 uW quiescent power)

System Features

  • Dual independents DC/DC Buck
  • GPIOs for seamless operation with PF PMICs
  • Rated from -40 °C to 150 °C TJ

Safety Features (ASIL B)

  • ASIL B compliant
  • 2 internal and 4 external voltage monitors
  • Windowed Watchdog Timer
  • PGOOD and FS0B outputs
  • ABIST and LBIST
  • SoC HW monitoring pins (FCCU and ERRMON)

Programmability

  • Supplies, sequencing and specific functions can be programmed by One Time programmable (OTP) memory
  • Standard Predefined OTP supporting popular MCU can be found in data sheet under “ordering information” chapter
  • Custom OTP can be provided for production. Please contact your NXP sales channel (NXP or your distributor)
  • Custom OTP can be created using the NXP GUI software tool

Product Longevity Program

  • This product is included in the NXP Product Longevity program ensuring a stable supply of products for your embedded designs. Automotive target market derivatives are included in the 15-year program and Industrial target market derivatives are included in the 10-year program

Part numbers include: MFS5600AMBA0ES, MFS5600AMBAFES, MFS5600AMEA0ES, MFS5600AMMA0ES, MFS5600AMMA7ES, MFS5600AMMA8ES, MFS5600AMMABES, MFS5600AVMA0EP, MFS5600AVMABEP, MFS5600AVMADEP, MFS5600AVMAEEP.

Comparison Table

Device options for Automotive

Part Number Target Market Safety Grade OTP ID
MFS5600AMMA0ES Automotive QM A0-Non-programmed
MFS5600AMBA0ES Automotive ASIL B A0-Non-programmed
MFS5600AMEA0ES Automotive Enhanced ASIL B A0-Non-programmed
MFS5600AMMA7ES Automotive QM A7 – SW1 = 5.0 V, SW2 = 3.3 V
MFS5600A7ES-OTP-Report
MFS5600AMMA8ES Automotive QM A8 – SW1 = 3.3 V, SW2 = 5.0 V
MFS5600A8ES-OTP-Report
MFS5600AMBAFES Automotive ASIL B AF – SW1 = 3.3 V, SW2 = 5.0 V
MFS5600AMBAFES-OTP-Report
MFS5600AMMABES Automotive QM AB – SW1 = 5.0 V, SW2 = 5.0 V
MFS5600AMMABES-OTP-Report

Device options for Industrial

Part Number Target Market Safety Grade OTP ID
MFS5600AVNA0EP Industrial QM A0-Non-programmed
MFS5600AVMABEP Industrial QM AB – SW1 = 5.0 V, SW2 = 5.0 V
MFS5600AVMABEP-OTP-Report
MFS5600AVMADEP Industrial QM AD – SW1 = 3.3 V, SW2 = 3.3 V
MFS5600AVMADEP-OTP-Report
MFS5600AVMAEEP Industrial QM AE – SW1 = 5.5 V, SW2 = 5.0 V
MFS5600AVMAEEP-OTP-Report

Buy/Parametrics

‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌

Documentation

Quick reference to our documentation types.

Filters

1-5 of 17 documents

Show All

Hardware

Quick reference to our board types.
Filters

1-5 of 9 hardware offerings

Show All

Software

Quick reference to our software types.

Filters

2 software files

Note: For better experience, software downloads are recommended on desktop.

Support

What do you need help with?

Search