MMPF0100: 14-Channel Configurable Power Management IC

Overview

The MMPF0100 is the first of the PF series of PMICs, featuring:

Configurable and programmable architecture supporting outputs with various current ratings to power the core processor, memory and a wide range of peripherals
Integration of full system-level power management functions to simplify system design
Optimized performance architecture for efficient, advanced functionality for consumer, industrial and automotive applications

The MMPF0100 is suited to all i.MX 6 processors: i.MX 6SoloX, i.MX 6SoloLite, i.MX 6Solo, i.MX 6DualLite, i.MX 6Dual, i.MX 6Quad, i.MX 6DualPlus and i.MX 6QuadPlus. It is built into multiple reference designs in the i.MX 6 family to provide a platform-level solution from that enables faster time to market.

Four to six buck regulators depending on configuration
- Single/dual phase/parallel options
- DDR termination tracking mode option
- DVS option
5V boost regulator for USB OTG
Six general purpose linear regulators
Coin cell charger and RTC supply
DDR termination reference voltage
Power control logic with processor interface and event detection
Programmable output voltage, sequence and timing

Individually programmable On, Off and Standby modes
OTP (one time programmable) memory for device configuration
- Reconfigurable OTP capability prior to blowing the configuration register fuses
- End customer programmable
Available in two package options
- E-Type QFN – 8mm x 8mm, 56 Ld
- Wettable Flank QFN – 8mm x 8mm, 56 Ld
Available in consumer/industrial and automotive AEC-100 Grade 3 qualifications
Industry-leading light load efficiency
Software support for i.MX6 dynamic voltage scaling

Four to six buck regulators depending on configuration
- Single/dual phase/parallel options
- DDR termination tracking mode option
- DVS option
5V boost regulator for USB OTG
Six general purpose linear regulators
Coin cell charger and RTC supply
DDR termination reference voltage
Power control logic with processor interface and event detection
Programmable output voltage, sequence and timing

Individually programmable On, Off and Standby modes
OTP (one time programmable) memory for device configuration
- Reconfigurable OTP capability prior to blowing the configuration register fuses
- End customer programmable
Available in two package options
- E-Type QFN – 8mm x 8mm, 56 Ld
- Wettable Flank QFN – 8mm x 8mm, 56 Ld
Available in consumer/industrial and automotive AEC-100 Grade 3 qualifications
Industry-leading light load efficiency
Software support for i.MX6 dynamic voltage scaling

MCU Supported

i.MX6SX, i.MX6S, i.MX6DL, i.MX6QP, i.MX6SL, i.MX53, i.MX6SLL, i.MX6D, i.MX6Q, i.MX6DP, i.MX6
Num. of Linear/LDO Regulators

7
Number of Regulators-Buck Switching

1, 6
Number of Regulators-Boost Switching

6, 1
Interface and Input Control

I2C