Low-Voltage 8-Bit I²C-Bus and SMBus Low-Power I/O Port with Interrupt, Weak Pull-Up and Agile I/O


See product image

Product Details

Select a section:


  • I²C-bus to parallel port expander
  • Operating power supply voltage range of 1.65 V to 5.5 V
  • Low standby current consumption:
    • 1.5 μA (typical at 5 V VDD)
    • 1.0 μA (typical at 3.3 V VDD)
  • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs
    • Vhys = 0.10 x VDD (typical)
  • 5 V tolerant I/Os
  • Open-drain active LOW interrupt output (INT)
  • 400 kHz Fast-mode I²C-bus
  • Internal power-on reset
  • Power-up with all channels configured as inputs
  • No glitch on power-up
  • Latched outputs with 25 mA drive maximum capability for directly driving LEDs
  • Latch-up performance exceeds 100 mA per JESD78, Class II
  • ESD protection exceeds JESD22
    • 2000 V Human Body Model (A114-A)
    • 1000 V Charged-Device Model (C101)
  • Packages offered: TSSOP16 and HVQFN16
  • Pin to pin replacement for PCA9554 and PCA9554B, PCA9554A and PCA9554C with interrupts disabled at power-up
    • Software backward compatible with PCA9554 and PCA9554B, PCA9554A and PCA9554C
  • Output port configuration: bank selectable push-pull or open-drain output stages
  • Interrupt status: read-only register identifies the source of an interrupt
  • Bit-wise I/O programming features:
    • Output drive strength: four programmable drive strengths to reduce rise and fall times in low capacitance applications
    • Input latch: Input Port register values changes are kept until the Input Port register is read
    • Pull-up/pull-down enable: floating input or pull-up/down resistor enable
    • Pull-up/pull-down selection: 100 kΩ pull-up/down resistor selection
    • Interrupt mask: mask prevents the generation of the interrupt when input changes state


Quick reference to our documentation types.

1-5 of 6 documents

Show All

Design Resources

Design Files

4 design files


2 hardware offerings

Engineering Services

1 engineering service

To find a complete list of our partners that support this product, please see our Partner Marketplace.


What do you need help with?