P&E's CYCLONE programmer is a powerful in-circuit, stand-alone programmer for many NXP® processor families. It's a versatile tool that offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
NXP Automotive audio video bridging (AVB) software provides complex AVB solution for multi-channel audio streaming and syntonized audio playback over multiple audio end nodes. It is optimized for NXP® Power Architecture® and Arm® Processors with minimal resource usage due to "zero-copy" approach with advanced DMA algorithms.
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
The iC5000 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and Nexus/ETM trace.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and Data Trace, and (iii) Performance Analysis and Code Coverage Analysis
The iC3000 Active Emulator is a powerful and adaptable debug and test tool. The new "swap the card" technology preserves the investment in the iC3000 unit while providing adaptability to a wide range of target microcontrollers and debug technologies
The iC5700 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and external (high speed) trace ports.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
Professional tool for designing AUTOSAR Software Components (SWCs). Using convenient graphical editors, you can design the structure and interfaces of the functional software of your ECUs quickly and clearly.
The emWin GUI Builder gives developers and designers a drag-and-drop tool to quickly implement the user interface framework. This coupled with the emWin Simulation Environment offers a professional solution to jump start any embedded application.
Configure and generate AUTOSAR basic software (BSW) and the RTE for your ECU – whether they are BSW modules from Vector (MICROSAR) or third party producers (e.g. MCALs from NXP) or even BSW modules you have created yourself.
Compatibility Mode - Full support for existing legacy code, compile your existing code base nearly "As Is." C Compiler Toolkit for all eTPU and eTPU2 targets in Our MPC55xx, MPC56xx Power Architecture micros, MCF52xx Coldifre micros
MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.
winIDEA is an integrated development environment (IDE) that compliments all iSYSTEM hardware. - Editor, project and build manager, high level debugger - Tools to analyze program and data flow, performance measurement tools
Develop with industry proven tools for C/C++ embedded applications, including compilers and run-time libraries, source- and assembly-level debugger, integrated development environment (IDE). Supports bare metal, Linux, Nucleus, other OS's.
Free command-line edition of the popular Sourcery CodeBench development tools. Available for NXP ARM and Power Architectures for bare metal bring-up, code debug in cache, ROM, RAM, Flash. Available now for free download.
testIDEA offers Real-Time Unit Testing by execution of test cases and test vectors on the real customer hardware without code instrumentation. testIDEA uses the isystem.connect programming interface which is a free and open API set within winIDEA.
User Interface for Ashling emulator and simulator products. Supports a wide range of 8-, 16- and 32-bit processor architectures. Easily configurable to support different targets. Simultaneous debugging for both multi-core systems and coprocessors.
UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.
The Green Hills BSP provides INTEGRITY & velOSity RTOSes and MULTI debugger for board- specific cross development through the Green Hills Probe, Slingshot or P&E Wiggler or, if no board is available, to the MULTI instruction set simulator.
A universal and compact solution for reprogramming ECUs quickly, efficiently and securely. Support for CAN, LIN, FlexRay and Ethernet programming including OEM and non-OEM ISO14229/30 (UDS/KWP) based download flows.
The SIP gives you a decisive advantage in developing your ECU software: Before delivery, we test and integrate your package on suitable HW, so that you can get the entire package up and running in just a few days.
EB tresos TimE Protection is a sofware module that enables the timing and ececution supervision of safety related applications. This, it provides freedom from interference of safety related software modules in regards to time and execution.
EB tresos Safety E2E Protection is a set of modules that supports the transmission of safety-related data between ECUs. It consists of an end-to-end communication protection library and an end-to-end protection wrapper.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes a GUI Builder and Simulation Environment to help speed your development.
HeartOS is a POSIX-based hard real-time operating system that is fast, light and well featured for small to medium embedded applications. HeartOS is modular, scalable & certifiable to DO-178B, Level A.
EB tresos AutoCore OS is a single- and multi-core operating system which supports all AUTOSAR scalability classes including memory protection. The multi-core version includes AUTOSAR extenstions like Inter-OS-Application Communicator (IOC).
Deos is a time & space partitioned RTOS, certified to DO-178B, Level A since 1998. Deos offers several unique fundamental and patented architectural advantages and delivers a high performance, low risk, simple to certify solution.
MICROSAR OS is a preemptive real-time multitasking operating system optimized for single and multi-core microcontrollers. It conforms to AUTOSAR 3.x and 4.x in scalability class 1-4. ISO26262 support available.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
AUTOSAR basic software for safety-relevant functions according to ISO 26262. MICROSAR Safe helps you to integrate safety-related functions into your ECU. It lets you develop AUTOSAR-based applications for ECUs up to ASIL D per ISO 26262.
EB tresos AutoCore is based on AUTOSAR release 4.0 including support for AUTOSAR 3.2 and previous releases. The hardware independent and hardware dependent modules can be integrated and qualified on various freescale automotive microcontrollers.
uC/TCP-IP is a robust embedded protocol stack written in accordance with the relevant RFCs. The stack is packaged with implementations of a number of popular application protocols and offers IPv4 and IPv6 support
Green Hills offers scalable suite of integrated communication stacks, middleware and graphics solutions, including secure networking stacks and protocols, SNMP, web applications, wireless, CORBA, USB, CAN and advanced file systems.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.