MPC5567|32-bit MCU|Powertrain

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Designed for engine management, the NXP^® MPC5567 embedded controller offers an ideal solution for any application that requires both high performance and FlexRay™ in a high-temperature automotive.

Targets mid-range engine management and industrial use cases that require complex, real-time control
Supports increased fuel efficiency and improved emissions
Offers system performance up to five times that of MPC500 predecessors
Facilitates reuse of legacy software architectures
Enables easy migration to next-generation 3 MB flash-embedded controllers
Pin-and code-compatible with other MPC5500 family MCUs

Data Sheet

Reference Manual

Product Details

Block Diagram

MPC5567 Microcontroller Block Diagram

Get diagram PDF

Features

Our e200z6 Core

High-performance 132 MHz 32-bit core built on Power Architecture technology with VLE
Memory management unit (MMU) with 32-entry fully associative translation lookaside buffer (TLB)
SPE (signal processing extension): DSP, SIMD and floating point capabilities

Memory

2 MB of embedded flash memory with error correction coding (ECC) and read while write capability (RWW)
64 KB on-chip static RAM with ECC
8 KB of cache (with line-locking) that can be configured as additional RAM

System

An enhanced time processor unit (eTPUs) with 32 I/O channels and 14.5K of designated SRAM
32-channel eDMA (enhanced direct memory access) controller
Interrupt controller (INTC) capable of handling 210 selectable-priority interrupt sources
Frequency modulated phase-locked loop (FMPLL) to assist in electromagnetic interference (EMI) management
MPC500 compatible external bus interface
Nexus IEEE^{^®}-ISTO 5001 class 3+ multicore debug capabilities > 5/3.3V IO, 5V ADC, 3.3V/1.8V bus, 1.5V core
416-pin PBGA and 324-pin PBGA package options
Temperature range: -40 to 125ºC

I/O

40 channel dual enhanced queued analog-to-digital converter (eQADC)—up to 12-bit resolution and up to 1.25 us conversions, six queues with triggering and DMA support
Three deserial serial peripheral interface (DSPI) modules—16 bits wide up to six chip selects each
Five controller area network (CAN) modules with 64 buffers each
Two enhanced serial communication interface (eSCI) modules
24-channel enhanced multiple I/O system (EMIOS) with unified channels
Dual-channel FlexRay interface
Fast Ethernet controller (FEC)

Development Tools

A comprehensive suite of hardware and software development tools is available to help simplify and speed system design
Development support is available from leading tools vendors providing compilers, debuggers and simulation development environments

Included in NXP ®.s product longevity program

Product longevity program with assured supply for a minimum of 15 years after launch

Design Resources

Design Files

3 design files

^Models
MPC5567 IBIS Model

ZIPRev 1.0Feb 15, 2007 00:00:00223.6 KBMPC5567_IBIS

Download
^{Printed Circuit Boards and Schematics}
MPC5500_OrCAD_SYMBOL

ZIPRev 1.3May 19, 2008 00:00:00159.5 KBMPC5500_ORCAD_SYMBOL
Sign in required

Download
^Calculators
MPC55xx EEPROM Emulation Endurance Calculator

ZIPRev vBeta052Nov 27, 2013 00:00:008.1 MBMPC55XX_EEE_CALC

Download

Hardware

1-5 of 10 hardware offerings

^{Emulators, Probes, and Programmers}
MPC5500 Flasher Utility

MPC5500_FLASHER_UTILITYZIP
^{Emulators, Probes, and Programmers}
Universal Multilink FX High-Speed Development Interface

U-MULTILINK-FX
^{Emulators, Probes, and Programmers}
PEmicro Cyclone programmer

CYCLONE
Additional hardware available. View our featured partner solutions.
^{Emulators, Probes, and Programmers}
PEmicro Cyclone FX programmer

CYCLONE-FX
^{Adapters, Cables, Sockets}
MPC55xx Debug and Target Adapters

MPC55xxADAPTERS
^{Evaluation and Development Boards}
MPC5567 VertiCal Base Boards

MPC5567VBBOARDS
^{Evaluation and Development Boards}
MPC5646C Devlce and Target Adapters

MPC5646C-DB
^{Evaluation and Development Boards}
MPC55xx Evaluation Board

MPC55xxEVB
^{Evaluation and Development Boards}
FlexRay Daughter Card (FRDC)

MFR4310FRDC
^{Evaluation and Development Boards}
MPCxxxx Calibration, Debug and Interface Boards

MPCXXXX

Show All

1-5 of 14 hardware offerings

^{Evaluation and Development Boards}
OSBDM_OSJTAG_RESOURCES

OSBDM/OSJTAG resource page, including links for OSBDM/OSJTAG virtual toolkit, firmware updates, driver downloads, design documents, and related information.

By P & E Microcomputer Systems, Inc Gold Partner
^{Evaluation and Development Boards}
OSBDM_OSJTAG_TOOLKIT

A set of Windows-based applications that function with the OSJTAG on NXP's tower board. Includes accelerometer, firmware updater, serial re-director, serial graph...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
Universal Access Device 3+ (UAD3+)

The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code c...

By PLS Development Tools Gold Partner
^{Test Accessories and Debugger}
TRACE32 Debug and Parallel NEXUS Trace for MPC5XXX

Lauterbach has over 40 years of experience in making world class microprocessor development tools. TRACE32 NEXUS for is a high-end debug and trace system for MPC5XXX with...

By Lauterbach Gold Partner
^{Test Accessories and Debugger}
Vitra-PPC

Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and...

By Ashling Microsystems Gold Partner
^{Test Accessories and Debugger}
PROGPPCNEXUS

The PowerPC Nexus Flash/EEPROM Programmer, for NXP's MPC55xx microprocessors, allows you to program both internal and external flash devices in-circuit via P&E's comp...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
CYCLONE FX

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
USB Multilink Universal FX

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC1...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
CYCLONE LC

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-control...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
USB Multilink Universal

The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX RT, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qori...

By P & E Microcomputer Systems, Inc Gold Partner
^{Test Accessories and Debugger}
Universal Access Device 2next (UAD2next

The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight ...

By PLS Development Tools Gold Partner
^{Test Accessories and Debugger}
Green Hills Probe

High speed on-chip download, run control and trace.

By Green Hills Software Platinum Partner
^{Test Accessories and Debugger}
Universal Access Device 2pro (UAD2pro)

The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfa...

By PLS Development Tools Gold Partner
^{Complementary Silicon or Component}
NOR Flash

Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash suppor...

By Micron Gold Partner