Arm7™ with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC2364FBD100 is a Arm7^™ microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 72 MHz. Features include up to 128 kB of flash memory, up to 34 kB of RAM, Ethernet MAC, USB Device/Host/OTG, DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 10-bit ADC, 10-bit DAC, 2 PWM, 4 general purpose timers, low power Real-Time Clock with separate battery supply, and up to 70 general purpose I/O pins. The LPC23xx are pin-compatible to the LPC176x Cortex-M3 series.

See product image

Data Sheet

Application Notes

Product Details

Block Diagram

Block diagram: LPC2364FBD100, LPC2364FET100, LPC2364HBD100, LPC2365FBD100, LPC2366FBD100, LPC2367FBD100, LPC2368FBD100, LPC2368FET100

Get diagram PDF

Features

Arm7TDMI-S^™ processor, running at up to 72 MHz
Up to 128 kB on-chip flash program memory with In-System Programming (ISP)
8 kB of SRAM on the Arm local bus for high performance CPU access
8 kB SRAM for general purpose DMA use also accessible by the USB
16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM
Dual Advanced High-performance Bus (AHB) system
Advanced Vectored Interrupt Controller (VIC)
General Purpose DMA controller (GPDMA) on AHB
Ethernet MAC with associated DMA controller
Four UARTs with fractional baud rate generation
USB 2.0 full-speed device with on-chip PHY
CAN controller with two channels
SPI controller
Two SSP controllers, with FIFO and multi-protocol capabilities
Three I2C-bus interfaces
I2S (Inter-IC Sound) interface for digital audio input or output
70 general purpose I/O pins with configurable pull-up/down resistors
10-bit ADC with input multiplexing among 6 pins
10-bit DAC
Four general purpose timers/counters with a total of 8 capture inputs
One PWM/timer block with support for three-phase motor control
Real-Time Clock (RTC)
2 kB SRAM powered from the RTC power pin
WatchDog Timer (WDT).
Standard Arm test/debug interface for compatibility with existing tools
Emulation trace module supports real-time trace
Single 3.3 V power supply (3.0 V to 3.6 V)
Four reduced power modes: idle, sleep, power-down, and deep power-down
Four external interrupt inputs configurable as edge/level sensitive
Processor wake-up from Power-down mode via any interrupt
Two independent power domains allow fine tuning of power consumption
Each peripheral has its own clock divider for further power saving
Brownout detect with separate thresholds for interrupt and forced reset
On-chip power-on reset
On-chip crystal oscillator with an operating range of 1 MHz to 24 MHz
4 MHz internal RC oscillator trimmed to 1 % accuracy
On-chip PLL

Target Applications

Industrial control
Medical systems
Protocol converter
Communications

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Documentation

Quick reference to our documentation types.

1-10 of 18 documents

Compact List

Guidelines for full-speed USB on NXP's LPC microcontrollers[AN11392]

PDFFeb 20, 2014Rev 1.1
IEC 60601-1-8 audible alert generator using the LPC2000[AN10687]

ZIPAug 9, 2013Rev 1.1
Using IAP for LPC2000 Arm^® devices[AN10256]

PDFJul 21, 2013Rev 1.0
UUencoding for UART ISP[AN11229]

PDFJul 6, 2012Rev 1.0
PCB layout guidelines for NXP^® MCUs in BGA packages[AN10778]

PDFApr 22, 2011Rev 2.0
Migrating to the LPC1700 series[AN10878]

PDFOct 6, 2009Rev 1.0
NicheLite for LPC implementation notes[AN10775]

PDFJul 16, 2009Rev 1.0
Full-duplex software UART for LPC2000[AN10689]

PDFJan 18, 2008Rev 1.0
uC/OS-II Time Management in LPC2000[AN10413]

PDFJul 18, 2007Rev 1.0
Migrating to the LPC2300/2400 family[AN10576]

PDFFeb 5, 2007Rev 1.0

Create smarter, more efficient white goods; An industry-leading portfolio of cost-effective, power-saving solutions for major home appliances[75016543]

PDFApr 8, 2018Rev 1.0
Cortex-M3 based microcontrollers with Ethernet, USB, CAN and 12-bit ADC; 100 MHz, 32-bit Microcontrollers with Cortex-M3™ core, LPC1700 series[75016676]

PDFFeb 1, 2009Rev 1.0
Arm^®7-based microcontrollers with Ethernet, USB, and CAN peripherals; 72-MHz, 32-bit microcontroller with Arm7TDMI-S™ core LPC23xx[75016573]

PDFAug 31, 2008Rev 1.0

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC[LPC2364_65_66_67_68]

PDFOct 16, 2013Rev 7.1

ES_LPC2364_66_68[ES_LPC2364_66_68]

PDFJul 23, 2012Rev 9.1

plastic low profile quad flat package; 100 leads; body 14 x 14 x 1.4 mm[SOT407-1]

PDFFeb 8, 2016Rev 1.0

PWM dual edge driver for 3-phase motor control using LPC23xx, LPC24xx[TN0700X]

ZIPJun 22, 2007Rev 1.0

LPC23XX User manual[UM10211]

PDFSep 11, 2012Rev 4.1

Design Resources

Design Files

Quick reference to our design files types.

2 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Models
IBIS models for LPC2364-2366-2368-2378

ZIPRev 1Jun 13, 2017 16:19:00495.4 KBIBIS_LPC2364-2366-2368-2378
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC2xxx ORCAD symbols

ZIPRev 0Jun 3, 2016 00:00:0013.1 KBLPC2000-ORCAD-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Software

Quick reference to our software types.

2 software files

Code Snippets
Sample Code Bundle for LPC23xx/LPC24xx Peripherals using Keil's μVision

ZIPRev 1Jul 29, 2016 00:00:00914.7 KBLPC23XX-24XX-SAMP-SW
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Code Snippets
Sample Code Bundle for LPC23XX and LPC24XX Peripheral Using KEIL'S ΜVISION

ZIPRev 1Jun 14, 2017 17:34:00747.6 KBSC_LPC23XX_-_LPC24XX_KEIL-ΜVISION
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Note: For better experience, software downloads are recommended on desktop.

Arm7™ with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC

Product Details

Block Diagram

Block diagram: LPC2364FBD100, LPC2364FET100, LPC2364HBD100, LPC2365FBD100, LPC2366FBD100, LPC2367FBD100, LPC2368FBD100, LPC2368FET100

Features

Target Applications

Buy/Parametrics

Documentation

Filter by

Application Note (10)

Guidelines for full-speed USB on NXP's LPC microcontrollers[AN11392]

IEC 60601-1-8 audible alert generator using the LPC2000[AN10687]

Using IAP for LPC2000 Arm® devices[AN10256]

UUencoding for UART ISP[AN11229]

PCB layout guidelines for NXP® MCUs in BGA packages[AN10778]

Migrating to the LPC1700 series[AN10878]

NicheLite for LPC implementation notes[AN10775]

Full-duplex software UART for LPC2000[AN10689]

uC/OS-II Time Management in LPC2000[AN10413]

Migrating to the LPC2300/2400 family[AN10576]

Brochure (3)

Create smarter, more efficient white goods; An industry-leading portfolio of cost-effective, power-saving solutions for major home appliances[75016543]

Cortex-M3 based microcontrollers with Ethernet, USB, CAN and 12-bit ADC; 100 MHz, 32-bit Microcontrollers with Cortex-M3™ core, LPC1700 series[75016676]

Arm®7-based microcontrollers with Ethernet, USB, and CAN peripherals; 72-MHz, 32-bit microcontroller with Arm7TDMI-S™ core LPC23xx[75016573]

Data Sheet (1)

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC[LPC2364_65_66_67_68]

Errata (1)

ES_LPC2364_66_68[ES_LPC2364_66_68]

Package Information (1)

plastic low profile quad flat package; 100 leads; body 14 x 14 x 1.4 mm[SOT407-1]

Supporting Information (1)

PWM dual edge driver for 3-phase motor control using LPC23xx, LPC24xx[TN0700X]

User Guide (1)

LPC23XX User manual[UM10211]

Design Resources

Design Files

Filter by

IBIS models for LPC2364-2366-2368-2378

LPC2xxx ORCAD symbols

Filter By

Software

Filter by

Sample Code Bundle for LPC23xx/LPC24xx Peripherals using Keil's μVision

Sample Code Bundle for LPC23XX and LPC24XX Peripheral Using KEIL'S ΜVISION

Filter By

Support

What do you need help with?

Suggested Links

Arm7^™ with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC

Using IAP for LPC2000 Arm^® devices[AN10256]

PCB layout guidelines for NXP^® MCUs in BGA packages[AN10778]

Arm^®7-based microcontrollers with Ethernet, USB, and CAN peripherals; 72-MHz, 32-bit microcontroller with Arm7TDMI-S™ core LPC23xx[75016573]