BGU6009/N2 GNSS LNA Evaluation Board

OM7883

Roll over image to zoom in

The BGU6009/N2 GPS LNA evaluation board simplifies the evaluation of the BGU6009/N2 LNA for the GPS application. The evaluation board enables testing of the device performance and requires no additional support circuitry. The board is fully assembled with the BGU6009/N2, the input series inductor and a decoupling capacitor. The board is supplied with two SMA connectors for input and output connection to RF test equipment. The BGU6009/N2 can operate from a 1.5 V to 3.1 V single supply and consumes about 5.1 mA.

Product Details

Select a section:

Block Diagram

BGU6009/N2 GNSS LNA Evaluation Board

Get diagram PDF

Supported Devices

RF

LNAs for GPS

  • BGU6009: Low Noise Amplifier MMIC for GPS, GLONASS, Galileo and Compass

Features

Power Management

  • Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
  • Supply voltage 1.5 V to 3.1 V
  • Optimized performance at low supply current of 5.1 mA
  • Power-down mode current consumption < 2 µA
  • ESD protection on all pins (HBM > 2 kV)
  • Requires only one input matching inductor and one supply decoupling capacitor
  • Input and output DC decoupled

Size

  • 1.1 mm x 0.9 mm x 0.47 mm; 0.4 mm pitch: SOT1230

General

  • 180 GHz transit frequency - SiGe:C technology
  • Integrated matching for the output
  • Integrated temperature stabilized bias for easy design
  • Noise figure (NF) = 1.0 dB
  • Gain = 17 dB
  • High input 1 dB compression point of -4 dBm
  • High out of band IP3i of 7 dBm

Buy Options

  • OM7883

  • BGU6009/N2 GNSS LNA Evaluation Board.

    • BGU6009/N2 LNA evaluation board in ESD safe packing
  • $160.00 USD
  • For a quantity of 1

Documentation

Quick reference to our documentation types.

Filters

2 documents

Design Resources

Select a section:

Design Files

Filters

2 design files

Support

What do you need help with?

  • Narrow your search
Search