-
OM7824
-
BGU8009 GNSS front end evaluation board.
- BGU8009 FE evaluation board in ESD safe packing
BGU8009 GNSS front end evaluation board
OM7824 Receive alerts
The BGU8009 GPS FE evaluation board simplifies the evaluation of the BGU8009 FE for the GPS application. The evaluation board enables testing of the device performance and requires no additional support circuitry. The board is fully assembled with the BGU8009, the input series inductor, a decoupling capacitor and input and output EPCOS B8313 SAW filters. The board is supplied with two SMA connectors for input and output connection to RF test equipment. The BGU8009 can operate from a 1.5 V to 3.1 V single supply and consumes about 4.4 mA.
Product Details
Supported Devices
RF
LNAs for GPS
- BGU8009: SiGe:C Low Noise Amplifier MMIC for GPS, GLONASS, Galileo and Compass
Features
Connectivity
- Input and output DC decoupled
- Noise figure (NF) = 1.6 dB
- Gain = 16.5 dB
- High input 1 dB compression point of -6 dBm
- 180 GHz transit frequency - SiGe:C technology
Power Management
- Supply voltage 1.5 V to 3.1 V
- Optimized performance at very low supply current of 4.4 mA
- Power-down mode current consumption < 1 µA
- ESD protection on all pins (HBM > 2 kV)
- Requires only one input matching inductor, one supply decoupling capacitor, and input and output EPCOS B8313 SAW filters
Wireless
- GNSS L1 bands
Size
- 1.1 x 0.9 x 0.5 mm3; 0.4 mm pitch: SOT1230
- Integrated matching for the output
- Integrated temperature stabilized bias for easy design
Buy Options