BGU8010 GNSS LNA evaluation board

OM7822

Roll over image to zoom in

The BGU8010 GPS LNA evaluation board simplifies the evaluation of the BGU8010 LNA for the GPS application. The evaluation board enables testing of the device performance and requires no additional support circuitry. The board is fully assembled with the BGU8010, the input series inductor and a decoupling capacitor. The board is supplied with two SMA connectors for input and output connection to RF test equipment. The BGU8010 can operate from a 1.5 V to 3.1 V single supply and consumes about 3.1 mA.

Product Details

Select a section:

Supported Devices

RF

LNAs for GPS

  • BGU8010: SiGe:C Low Noise Amplifier MMIC for GPS, GLONASS, Galileo and Compass

Features

  • Noise figure (NF) = 0.90 dB
  • Gain = 16.1 dB
  • Input 1 dB compression point of -9 dBm
  • Out of band IP3i of 0 dBm

Connectivity

  • Requires only one input matching inductor and one supply decoupling capacitor
  • Input and output DC decoupled
  • Integrated matching for the output

Power Management

  • Supply voltage: 1.5 V to 3.1 V
  • Optimized performance at very low supply current of 3.1 mA
  • Power-down mode current consumption < 1 µA
  • Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
  • ESD protection on all pins (HBM > 2 kV)
  • 1.1 mm x 0.9 mm x 0.5 mm; 0.4 mm pitch: SOT1230
  • 180 GHz transit frequency - SiGe:C technology

Buy Options

  • OM7822

  • BGU8010 GNSS LNA evaluation board.

    • BGU8010 LNA evaluation board in ESD safe packing
  • $160.00 USD
  • For a quantity of 1

Design Resources

Select a section:

Documentation

Quick reference to our documentation types.

Filters

1 documents

Support

What do you need help with?

  • Narrow your search
Search