CodeWarrior® Development Suites for Networked Applications
Overview
Features
Features
Developer Suite Level
This suite is the primary suite for customers who develop with multicore processors built on Power Architecture including, LS series devices and QorIQ Qonverge SoCs as well as DSPs based on StarCore technology. The Developer Suite is for designers with full system responsibility but no need for extra costs of the specialist and architect features. No matter what market your products serve, these tools would be the most useful tools and are what we would consider the workhorse set of development tools.
- Configuration Tools
- RCW-PBL Configuration
- Linux Device Tree Configuration
- Arm®v7
- Arm®v8
- QorIQ Processors
- PowerQUICC® Processors
- StarCore 3850 DSPs
- StarCore 3900FP DSPs
- StarCore DSPs
Specialist Suite Level
You will get all the features from the developer suites plus
- DDR Validation tool: The DDR (Double Data Rate RAM Memory) Validation tool (DDRv) is a software application that helps you “tune” the DDR settings that can be the most difficult to get "centered."
- SerDes Validation: The SerDes Validation tool (SerDes-v) is a software application that helps you “tune” the SerDes settings so you can get the optimal SerDes performance.
- Debug print Ability to perform printf-like operations from for bare-metal, Linux kernel or Linux user-space applications directly in hardware trace buffers. This vastly reduces logging facility intrusiveness.
- General purpose program Arm® Trace Ability to configure, retrieve and display Arm® core trace including program and data.
Supported Devices
Get Started
"How to" Videos (Licensing)
List of our most frequently asked questions in regards to licensing and registration of CodeWarrior® products.
Please contact NXP support for any additional questions or problems regarding your CodeWarrior® product. If you need to register or obtain a license for your CodeWarrior® product, please visit the CodeWarrior® License Information section.
License Manager Installers
These downloads contain the necessary software to install the FLEXlm license manager. The license manager software should be installed on the license server machine which will facilitate floating licenses for your NXP product.
Please locate below the appropriate download for your license server machine. If you are not sure, you should consult with your license server administrator.
Below is a table that outlines which Operating System versions we officially support and test with our license manager.
NOTE: Any installation or use outside of this scope will not be officially supported.
| Installer | Versions Supported |
| Windows | Win2003, Win2008, Win7, Win 8, Win 10 |
| Windows Server | 2019, 1903, 1909, 20H2 |
| Linux | Red Hat EP v5.x, Red Hat EP v6.x, SUSE 11 Ubuntu 12.04 |
USB Dongle Drivers
These downloads are applicable for using a USB dongle to license your NXP product. You should receive documentation within your USB dongle kit that has detailed instructions for getting your product up and running with a license tied to the dongle. These downloads along with the most recent Dongle QuickStart Guide are listed below for your convenience.
- lmtools for Windows (64-bit)
-
LMTOOLS is a graphical user interface to the license manager tools allowing setup and configuration of your FLEXlm license server.
- lmtools for Windows (32-bit)
-
LMTOOLS is a graphical user interface to the license manager tools allowing setup and configuration of your FLEXlm license server.
- USB Dongle Driver Installer
-
This driver is for use with CodeWarrior® Classic products on Windows.