Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
P&E's CYCLONE programmer is a powerful in-circuit, stand-alone programmer for many NXP® processor families. It's a versatile tool that offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Processor Expert Software for i.MX Processors is a suite of configuration tools for the i.MX family of processors. It contains the Pin Settings Tool which provides an easy way to configure pin signals, from multiplexing (muxing) to the electrical properties of pins. With the Pin Settings Tool all the pins can be configured with a graphical user interface, and then generate normal C code which then can be used in the application.
The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for our Unlimited Flash Breakpoints and GDB Server enhancement modules included.
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.
Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.
Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.
In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
Storyboard provides a faster way to create best-in-class GUIs across the widest range of target devices and was built with scalability and resource management at the forefront, ensuring that teams can build modern UIs on budget, and on time.
The emWin GUI Builder gives developers and designers a drag-and-drop tool to quickly implement the user interface framework. This coupled with the emWin Simulation Environment offers a professional solution to jump start any embedded application.
Embedded Wizard is a solution that enables the creation of sophisticated GUIs for MCUs and MPUs. The GUI development is speeded-up with the use of the built-in WYSIWYG editing facility, instant prototyping, simulating and debugging on PC.
Embedded Studio is a streamlined and powerful C/C++ IDE for ARM microcontrollers specifically designed to provide you with everything needed for professional embedded development: an all-in-one solution aiming at stability and a continuous workflow.
MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.
IAR Embedded Workbench for ARM is an integrated development environment with project management tools and editor. It includes a highly optimizing C/C++ compiler and the comprehensive C-SPY Debugger with simulator and hardware debugging support.
Completely integrated with IAR Embedded Workbench, C-RUN helps you find errors at an early stage by checking application execution. It checks for arithmetic issues, bounds issues and heap integrity, and provides detailed runtime error information.
C-STAT is a fast and powerful static analysis tool that provides results directly in the IAR Embedded Workbench IDE. It checks compliance with rules as defined by MISRA C:2004, MISRA C++:2008 and MISRA C:2012, CWE and CERT C/C++.
The Green Hills BSP provides INTEGRITY & velOSity RTOSes and MULTI debugger for board- specific cross development through the Green Hills Probe, Slingshot or P&E Wiggler or, if no board is available, to the MULTI instruction set simulator.
MicroEJ’s software platform disrupts the way to design NXP-based electronics through unrivaled virtualization technology. This software platform leverages NXP hardware & cloud innovations to produce more powerful devices and highly complex products.
FreeRTOS+FAT is an open source, thread aware and scalable FAT12/FAT16/FAT32 DOS/Windows compatible embedded FAT file system. Featuring optional caching, directory name hashing, long file names, standard and extended error reporting, & stdio.h API.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes a GUI Builder and Simulation Environment to help speed your development.
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
embOS/IP is an ANSI-C TCP/IP Stack written specifically for embedded applications while extending the standard socket interface. This is complemented by a speed optimized true Zero-Copy API which reads and writes data without the use of a memcopy.
emUSB Device is a high speed USB device stack. This is written in ANSI C and can run on any platform. emUSB can be used with embOS or any RTOS chosen. A variety of target drivers are available. Support for new platforms can usually be added no cost.
emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
The Nitrogen7 is a multi-purpose single board computer based on the i.MX7 processor from NXP. The i.MX7 processor from NXP has ARM Cortex™-A7 and ARM Cortex™-M4 cores which provide unique features to the i.MX family.
highly flexible SoM based on i.MX7 1GHz Dual core ARM Cortex-A7 alongside real-time 200MHz ARM Cortex-M4 co-processor, with a variety of interfaces and connectivity options: certified Wi-Fi, Bluetooth/BLE, dual GbE, dual USB, audio, display, touch.
phyCORE-i.MX7: NXP i.MX7 Single or Dual-Core @ 1 GHz; 41 x 50 mm dimensions; up to 2 GB DDR3; up to 8 GB NAND or 128 GB eMMC; 4 KB I2C EEPROM; 16 MB QSPI Flash; 2x Gigabit Ethernet (1x on-board PHY); 2x USB 2.0 OTG, 1x USB 2.0 HSIC Host; PCIe;
Evaluation platform or off-the-shelf industrial grade Single Board Computer (SBC) solution supporting the phyCORE-i.MX7 SOM. The 105 x 72 mm PCB features Dual Ethernet (RJ-45); USB Host (Standard-A); USB-OTG (Micro-AB); Micro SD Card; Mini PCIe;
Ultimate development platform that provides access to all i.MX7 features. •Every IOMUX pin is available for monitoring and connection •Supports different voltage rails for each IOMUX group •Supports all i.MX7 boot options
The Type ZP is a 2.4GHz+5GHz IEEE 802.11a/b/g/n/ac Wi-Fi + Bluetooth 4.0 module based on the Broadcom BCM4339 chipset. It integrates Wi-Fi/Bluetooth IC, RF front end and crystal. The module dimensions are 7.8 x 7.4 x 1.0 mm.
PIXI-9377 is a fully certified (FCC, TELEC, IC, CE, RCM) dual-band Wi-Fi 802.11a/b/g/n/ac with Bluetooth 5 SDIO module optimized for cost, size and performance. It is based on the QCA9377-3 chipset and drivers for NXP i.MX Series are available.