Linux Board Support Packages (BSPs) for NXP Silicon are tested and certified ensuring a fully operational tool chain, kernel and board specific modules that are ready to use together within a fixed configuration for i.MX hardware development tools. These BSPs provide the foundation you need to begin your project quickly.
Set of desktop applications for the Linux L3.10.53-1.1.0-GA-5.0.11P4 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes desktop applications. Refer to i.MX_6_Graphics_User's_Guide_review.pdf for documentation.
Set of applications for the Linux L3.10.17_1.0.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
Set of applications for the Linux L3.0.35_4.1.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
Set of applications for the Linux L3.0.35_3.0.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
Processor Expert Software for i.MX Processors is a suite of configuration tools for the i.MX family of processors. It contains the Pin Settings Tool which provides an easy way to configure pin signals, from multiplexing (muxing) to the electrical properties of pins. With the Pin Settings Tool all the pins can be configured with a graphical user interface, and then generate normal C code which then can be used in the application.
Set of applications for the Linux L3.14.28_1.0.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
Set of applications for the Linux L3.10.53_1.1.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
u-blox evaluation kit for host based JODY-W263 Wi-Fi/Bluetooth modules - Wi-Fi Standards IEEE 802.11a/b/g/n/ac and Bluetooth/Bluetooth Low Energy 5.1 . The kit includes SDIO/micro-SDIO adaptor, USB-to-UART cable for Bluetooth, on-board SDIO level-shifter, dual-band antennas - to connected over SMA connectors.
NXP offers a portfolio of products and solutions that support your design cycle form start to finish. During your software development cycle the support team at NXP is here to help. Accelerate your design cycle by utilizing the NXP premium support team today
CoreAVI provides high performance embedded OpenGL ES and OpenGL SC graphics and H.264 video decode drivers, with support for a number of system configurations and RTOSs including Wind River VxWorks, DDC-I Deos, Green Hills INTEGRITY.
Wind River® Linux is the leader for building outstanding open source embedded products, ensuring customers work with the latest code from the most important open source efforts and most recent technologies.
emMQTT is provides the client functionality of the Message Queue Telemetry Transport protocol to a stack. emMQTT uses sockets and can be used with any IP stack such as emNet using the socket interface.
emModbus, SEGGER's implementation of the Modbus protocol, supports communication via UART (ASCII, RTU), Ethernet (Modbus/TCP and Modbus/UDP), and is capable to communicate with any Modbus compliant device.
Windows Embedded Compact 7 reference BSP for i.MX6, with support for SABRE LITE development kits. Includes advanced features such as optimized GPU graphical acceleration driver, wireless connectivity, NDIS6 ethernet, and multi-display support.
Windows Embedded Compact 7 Reference BSP for i.MX 6, with support for SABRE SDB dev. kits. Includes advanced features such as optimized GPU graphical acceleration driver, wireless connectivity, NDIS6 ethernet, and multi display support.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems
PRISANK is primarily our internal system platform supporting Borea embedded hardware platforms based on NXP i.MX and QorIQ chips but it can be extended to other platforms as well. It provides support for complete operation of embedded device.
The GuruCE iMX6 BSP is a high quality, well structured, stable, full source BSP for WEC7 and WEC2013 supporting any board containing a NXP i.MX6 UL, ULL, Solo, Dual-Lite, Dual, DualPlus, Quad or QuadPlus processor.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
emNet is an ANSI-C TCP/IP Stack written specifically for embedded applications while extending the standard socket interface. This is complemented by a speed optimized true Zero-Copy API which reads and writes data without the use of a memcopy.
Green Hills offers scalable suite of integrated communication stacks, middleware and graphics solutions, including secure networking stacks and protocols, SNMP, web applications, wireless, CORBA, USB, CAN and advanced file systems.
VxWorks®, the industry’s leading real-time operating system, provides a family of products that deliver all the scalability, safety, security, and virtualization capabilities needed for today’s development challenges.
emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
The IoT Toolkit is a collection of libraries that enables communication with modern IoT based environments and devices. It's a high-performance collection of libraries optimized for minimum memory consumption in RAM, ROM, high speed, and versatility.
Alango’s Voice Activity Detection (VAD) technology reliably detects human speech in an acoustic signal. The technology is based on a proprietary, high-resolution spectral noise estimation algorithm operating in real time.
Voice Communication Package (VCP) is a universal software package of digital signal processing technologies for voice applications enabling high quality, full duplex, and noise free communication from various environments.
FreeRTOS+TCP is a scalable, open source and thread safe TCP/IP stack for FreeRTOS. FreeRTOS+TCP provides a familiar and standards based Berkeley sockets interface, making it as simple to use and as quick to learn as possible.
FreeRTOS+FAT is an open source, thread aware and scalable FAT12/FAT16/FAT32 DOS/Windows compatible embedded FAT file system. Featuring optional caching, directory name hashing, long file names, standard and extended error reporting, & stdio.h API.
eSync is a multi-company specification promoted by the eSync Alliance. It delivers and updates software and firmware over the air, while collecting real-time data from in-car devices including ECUs, domain master ECUs, network gateways and, sensors.
Most toolchains using GCC also use either newlib, newlib-nano or glibc. Unfortunately, these libraries have significant disadvantages over professional runtime libraries for embedded systems. This is where the SEGGER Runtime Library comes in.
Market leading RTOS from Real Time Engineers Ltd. that supports more than architectures and receives more than 100,000 downloads a year. Professionally developed, strictly quality controlled, robust, supported, free for use in commercial products.
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
Nucleus has been deployed in over 3 billion devices since 1993 making the code base extremely stable. Nucleus is the only RTOS that offers a Power Management Framework to compliment hardware power modes to conserve power usage in the device.
emCompress offers solutions to compress data for all kinds of applications where size matters. Designed for embedded systems, emCompress can compress and decompress data even on smallest microcontrollers.
A pre-Yocto graphical embedded Linux build environment that offers optimized workflows and “cleaned,” pre-configured BSP components so you can create custom BSPs easily and quickly. Timesys Factory is available in desktop and cloud configurations.
The Vision Pack for MPU provides developers with an end to end, H/W accelerated video pipeline for optimized AI based vision applications. Fully integrated with DeepViewRT inference engine for high performance / low overhead AI vision solutions.
Turn-key apps for target-optimized end-to-end AI Vision solutions ready for deployment on DeepView Vision Starter Kits or your own hardware built with i.MX Applications Processors and i.MX RT Crossover MCUs
DeepView Model Pack is a bundle of state-of-the-art detection models pretrained with COCO and OpenImages and has been fully tested & optimized for NXP RT Crossover MCU’s and i.MX 8M Applications Processors.
HyperCore™ (Hypervisor GPU Manager) is designed to enable the virtualization of graphics/video capabilities using one or more graphics processors being utilized by multiple instances of independent partitions or guest operating systems.
A common challenge for manufacturers of embedded systems is to guarantee a system's firmware can be updated easily. To fix bugs in the field or to enhance the features of deployed systems, SEGGER provides emLoad, the bootloader for firmware updates.
i.MX 8M, i.MX 8M Mini, i.MX6 Evaluation Kit with 7.0" capacitive touch display, SODIMM200 standard. All relevant interfaces of the i.MX6, i.MX 8M and i.MX 8M Mini processors are available and a complete development can be realized.
i.MX 8M, i.MX 8M Mini, i.MX6 Evaluation Kit with 5.0" touch display, SODIMM200 standard. All relevant interfaces of the i.MX6, i.MX 8M and i.MX 8M Mini processors are available. Supports e.g. Ethernet, USB, RS232, CAN, RS485, GPIO, SPDIF, UART, I2C
Extensive Starterkit w COM w GB Ethernet + MIPI-CSI camera (efusA9) incl. Windows Embedded Compact 2013 or Linux, base board, 7“ WVGA TFT display with or without RGB interface and touch panel, cable kit, access data to documentation and software
UDOO(TM) is an open hardware, low-cost computer equipped with an ARM(R) i.MX6 NXP (TM) processor for Android and Linux, alongside an Arduino (TM) Due ARM SAM3X. Both CPUs are integrated on the same board.
i.MX 6 Evaluation Kit for the i-PAN7 Touch Panel Computer with 7.0" touch display, capacitive or resistive. The relevant interfaces of the i.MX 6 processor are available and a complete development can be realized.
i.MX6DL SODIMM Development Platform incorporates i.MX6DL SODIMM SOM & compatible Carrier Card. Development Kit is highly packed with all necessary on board connectors (HDMI, SATA, LVDS, UART, CAN etc.) to validate complete i.MX6 SODIMM SOM features.
i.MX 8M, i.MX 8M Mini, i.MX6 Evaluation Kit with 7.0" touch display, SODIMM200 standard. All relevant interfaces of the i.MX6, i.MX 8M and i.MX 8M Mini processors are available. Supports e.g. Ethernet, USB, RS232, CAN, RS485, GPIO, SPDIF, UART, I2C
i.MX 8M, i.MX 8M Mini, i.MX6 Evaluation Kit with 7.0" touch display, SODIMM200 standard. All relevant interfaces of the i.MX6, i.MX 8M and i.MX 8M Mini processors are available. Supports e.g. Ethernet, USB, RS232, Mini PCIe, Camera, GPIO, SPDIF, UART
i.MX6DL Development Platform incorporates i.MX6DL Qseven SOM & Qseven compatible Carrier Card. The board is highly packed with all necessary on board connectors (MIPI Camera, LVDS, Ac’97 codec, HDMI v1.4 to validate complete i.MX6DL SOM features
JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.
The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKpro is compatible with Keil MDK and Arm DS.
I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is fully plug-and-play and completely integrated with IAR Embedded Workbench for ARM.
Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.
J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface of J-Trace PRO Cortex enables continuous streaming trace via USB with the full trace clock, lifting the limitations by internal buffers.
Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for our Unlimited Flash Breakpoints and GDB Server enhancement modules included.
Lauterbach has experience in making world class microprocessor development tools since 1979. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers and real-time trace solutions for all NXP processor series.
J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.
JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.
The panel mount HMI features extreme robustness and is easy to be integrated from the front into a cutout in the front of the housing. Available from 4.3 up to 12.1 inch and based on the latest Garz & Fricke embedded board solutions
PIXI-9377 is a fully certified (FCC, TELEC, IC, CE, RCM) dual-band Wi-Fi 802.11a/b/g/n/ac with Bluetooth 5 SDIO module optimized for cost, size and performance. It is based on the QCA9377-3 chipset and drivers for NXP i.MX Series are available.
uSD-M.2 adapter board provides out-of-box experience for NXP i.MX with Murata’s M.2 Module Family enabled by Embedded Artists; interfacing WLAN/BT-signals including WLAN-SDIO, BT-UART, BT-PCM/I2S, and GPIO's are included on M.2 connector pins.
Our turnkey single board computers are available in a rugged housing for DIN rail mounting as well. Take benefit from our experience and our highly scalable platform concept with uniform software distribution!
Build-in Glass Touch Panel Computer based the Trizeps VII CPU module with i.MX 6Solo or DualLite, SODIMM200 standard, , protection class IP 65. The unit is suitable for multimedia, multitouch, multidisplay applications and demanding control tasks.
Type 1XA is a 2.4GHz & 5GHz module based on Infineon CYW54591 combo chipset which supports Wi-Fi 802.11a/b/g/n/ac 2x2 MIMO RSDB + BT 5.2 BR/EDR/LE up to 866 Mbps PHY data rate on Wi-Fi and 3Mbps on Bluetooth. Module dimensions are 11.4 x 8.9 x 1.4mm.
Type 1DX is high performance module based on Infineon CYW4343W combo chipset which supports Wi-Fi 802.11b/g/n + Bluetooth 5.1 BR/EDR/LE up to PHY data rate of 65Mbps on Wi-Fi and 3Mbps on Bluetooth. The module dimensions are 6.95 x 5.15 x 1.1mm.
Automotive-grade DSRC V2X OBU with HSM , OMNIAIR certified V2X stack and Application. Used in large scale field trials, aftermarket deployments, and as a reference design for automotive. Use NXP IMX6Dl, SAF5100,TEF5100,SXF1800
We build our modules from start to finish—designing, manufacturing, and testing all of the DRAM ourselves before assembling the modules and testing again. So, from high-performance SODIMMs to high-density LRDIMMs, you can depend on Micron.
Type 1MW is a 2.4GHz & 5GHz module based on Infineon CYW43455 combo chipset which supports Wi-Fi 802.11a/b/g/n/ac + Bluetooth 5.0 BR/EDR/LE up to PHY data rate of 433Mbps on Wi-Fi and 3Mbps on Bluetooth. Module dimensions are 7.9 x 7.3 x 1.1mm.
The modern HMI with many design options for a seamless or even complete flush integration. Available from 4.3 up to 19 inch with a capacitive touchscreen and based on the latest Garz & Fricke embedded board solutions
This modular touchpanel system can be equipped with various electronic components and touch displays. The individual components are separately available or as assembly units. Based on Trizeps VII with i.MX 6, SODIMM200 standard
7.0 inch Touchpanel Computer with a compact metal housing for a quick and simple integration in an existing frame and functional enhancement such as an industrial HMI. Based on Trizeps VII with i.MX 6Solo or DualLite, SODIMM200 standard
Type LV is a 2.4GHz & 5GHz module based on Infineon CYW43012 combo chipset which supports Wi-Fi 802.11a/b/g/n + Bluetooth 5.0 BR/EDR/LE up to PHY data rate of 72.2Mbps on Wi-Fi and 3Mbps on Bluetooth. Module dimensions are 10.0 x 7.2 x 1.4mm.
V2X RSU provides preloaded V2X stack running on Linux OS. Outdoor weatherproof enclosure. User friendly SDK is provided for Application Development. HSM Supported. ETSI ITS G5 ,IEEE 1609.X , compliance. Use NXP IMX6DL SAF5100,TEF5100,SXF1800
This module based on the imx6 is available with a set of standard configurations, but we offer the possibility to add any configuration requested and even a licensing model to get the design. This is a project based pro Development system available.
DIMM-MX6x for your embedded control solutions and multimedia devices. Board Support Package (BSP: -Linux (Debian 8.0) -Linux (Yocto 1.5.1) -Mainline Linux with_RT Patch -WEC7 and WEC2013 -QNX 6.6 -Android 4.4
Embedding the i.MX6 QuadPlus/Quad/Dual/DualLite/Single core ARM CA9, the VAR-SOM-MX6 allows designers to use a single System on Module in a broad range of applications to achieve short time-to-market, reduce R&D development risk and overall cost.
i.MX6 Solo core based Pico-ITX SBC, ARM cortex A9 CPU @800MHz, HD 1080p encode & decode, HD video playback in 2D/3D GPU. Highly integrated platform for increased performance in Industrial Control & Home Energy Management Systems
OKMX6DL-C single board computer consists of carrier board and CPU module FETMX6DL-C. The carrier board was designed as a 4-layer PCB and on-board connectors such as Gigabit Ethernet, CAN bus, parallel cammera, WIFI&BT, etc.
Module is based on the NXP® Cortex™ A9 CPU offering high performance, lowest power consumption and a high degree of functional integration for high level embedded applications. The i.MX6x processor is combined with DDR3 SDRAM, SLC NAND Flash and GbE
The design of the MSC Q7-IMX6PLUS module was optimized to provide an especially economic platform for NXP’s i.MX6 and i.MX6Plus CPUs offering quad-core, dual-core and single-core ARM® Cortex™-A9 compute performance at very low power consumption
i.MX6 DualLite core based Pico-ITX SBC, ARM cortex A9 CPU @1GHz, HD 1080p encode & decode, HD video playback in 2D/3D GPU. Highly integrated platform for increased performance in intelligent Industrial Control & Home Energy Management Systems
μQ7-962 is a Qseven® Rel. 2.0 Compliant Module designed by SECO that offers top computational and graphical performances given by low-power consuming ARM architecture. The board integrates i.MX6 Multimedia Applications platform from NXP
Supporting the i.mx6 Solo /DL /DualQuad /Singe core ARM Coretex A9, CPU VERA allows designers to use a single System modeule in a board range of applications to achieve short time-to-market for their current innovations, while still accomodating pote
Latest addition to our product portfolio is NXP i.MX6 based processing platform design. It is customizable and we can adapt it to your needs. It supports networking and multimedia connectivity together with the storage.
CPU:i.MX6Q:Compatible with the industrial, commercial expansion grade Accept the 6U/S mass customization Memory：LPDDR21GB, up to 2GB Storage：SPI NorFlash/4GB EMMC, Up to 64GB EMMC Power Supply: 5V Size: 40mm x 42mm
The SYS-A62-10 is a 10.1” Panel PC based on the Multicore NXP i.MX6 SoC family. It features a long-endurance display (30K hours) with 1280 (RGB) X 800 resolution, along with P-Cap (Projected-Capacitive touch) technology and glass cover.
The FirstView SOM Carrier Board is a companion board to the FirstView SOM designed to speed up development of hardware and software. The carrier allows the developer to test multiple peripherals with network connectivity and user interfaces.
Ultra-Low power SOM, based on the i.MX6 application processor with single/dual or quad core ARM® Cortex™-A9 architecture. Built on the SMARC form-factor,-40 to +85°C,up-to 4GB DDR3,optional PCIe switch on-board. Long term availability (10y)
TEP-1560-IMX6 is a modular, scalable, fanless 15.6 inch HMI based on a single/dual/quad core ARM Cortex-A9 NXP i.MX6 applications processor. Compatible with TechNexion expansion board series for additional input and output’s.
CU1201 embedded computer was designed based on NXP i.MX6DL processor with main frequency up to 1GHz, it has 1GB RAM and 8GB eMMC, integrates with RS485, CAN, ESAM, PSAM,USB, Ethernet, 4G, WIFI, LVDS, HDMI, DI, DO, audio and other peripherals
The Nitrogen6X-SOM, a low cost, highly integrated System-on-Module based on the NXP i.MX6 Single/Dual/Quad-Core CPU. The SOM is ideal for customers looking for rapid product development while maintaining the flexibility of a custom design.
The single board computer NOVA which has an expansion board to carry the VERA i.MX6 is one of our design of the base plate. The flexible design allows the fast and easy way of realizing and upgrading the controller’s capabilities.
CPU：i.MX6QP/Q/U/S: Compatible with the automotive, industrial, commercial expansion grade Memory: DDR3 1GB, up to 2GB Storage: SPI NorFlash/4GB EMMC, Up to 64 GB EMMC Power supply: 5V Size: 40mm x 68mm
Utilite is a fanless ARM Cortex-A9 computer delivering high performance and rich I/O in a tiny form-factor. Utilite is offered with fully featured, desktop-grade Ubuntu Linux or Android operating systems with PC-like user experience.
ConnectCore 6 is an i.MX6 SMT multi-chip module. Features include integrated Wi-Fi, Bluetooth, PMIC and Kinetis Microcontroller. 400 pin LGA for reliable connection and access to all i.MX6/Kinetis features. 5-year warranty and global support.
The Nitrogen6_MAX is a turbo-charged version of our popular Nitrogen6X platform. Nitrogen6_MAX is a single board computer that features the same Quad-Core i.MX6 processor from NXP, but has significant upgrades to allow for high-end processing.
Single Board Computer based on i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex™ A9 ARM Core (up to Quad Core processors). All the advantages of an ARM architecture in an extremely reduced space
·NXP® i.MX 6S/U/Q:Compatible with the commercial expansion, automotive, industrial grade ARM Cortex-A9 Memory：DDR3 1GB, up to 2GB Storage：SPI NorFlash/4GB EMMC, Up to 64GB EMMC Power Supply: 5V Size: 40mm x 80mm
phyBOARD-Nunki is designed especially for image processing applications-a further development of our proven phyBOARD-Mira. It makes optimal use of the two Image Processing Units (IPU) of the i.MX 6Quad processor.
TEP-1010-IMX6 is a modular, scalable, fanless 10.1 inch HMI based on a single/dual/quad core ARM Cortex-A9 NXP i.MX6 applications processor. Compatible with TechNexion expansion board series for additional input and output’s.
High Reliable Boot, Encryption Engine, Random Number Generator, and Tamper Detection; Integrated 1x Industrial Gigabyte Ethernet MAC(10/100/1000MHz); Integrated 2x CAN, up to 1Mbps, support CAN 2.0 Protocol; Extended 3x serial interface, HDMI interface, LVDS display interface; Complete Compatible with Linux and Android embedded OS.
One of the smallest dual-core CoM in the world, the Ka-Ro TX6 is based on Our i.MX6 processor. The module takes only 26 cm² (36 mm x 71 mm with socket) and a height of just 4.5mm. All TX modules are pin-compatible and a 10-year availability
i.MX6 DualLite core ARM cortex A9 @1GHz Qseven compatible SoM with on-board 1GB DDR3(expandable), eMMC flash & micro SD slot. It supports industry latest high performance interfaces like PCIe Gen2, Gigabit Ethernet, SATA 3.0, HDMI 1.4 & SDXC
Qseven® Rel. 2.0 Compliant Module with an ARM architecture and integrated i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex® A9 ARM Core (up to Quad Core processors)
Compliant Module with the NXP i.MX6 Processor features all the processor and integrated native I/O capabilities of the SoC, in compliance with the Qseven standard. Supplied with a complete and fully-featured BSP.
The SOM is an embedded single board module designed to be reliable, rugged, and low cost. The board is designed to be paired with a custom carrier board to fit specific applications in a wide range of environments.
The Nitrogen6X is a production ready i.MX6-based single board computer that can also be used for development purposes. The design allows customers to easily embed the Nitrogen6X into an enclosure and get to market quickly.
Small sized form factor with high performance for TTL displays up to 5.0". 1 GHz, up to 1 GB DDR3L, 4 GB eMMC Flash,1x 10/100 Mbit/s Ethernet (RJ-45), 1x RS-232, 1x CAN (ISO/DIS 11898), RS485, I²C, 2x USB
Pin2pin to the VAR-SOM-MX6, the VAR-SOM-SOLO/DUAL from Variscite carries much smaller dimensions and a slim lined price-point. Features include NXP i.MX6 single/dual 1GHz Cortex-A9, SLC NAND, eMMC, dual band Wi-Fi/BT, USB, GbE and more.
TEK3-IMX6 is a scalable, high-performance fanless box PC based on a single/dual/quad core ARM Cortex-A9 NXP i.MX6 series processor. Compatible with TechNexion expansion boards series for additional input and output’s.
Low-end Single Board Computer with NXP i.MX6 Processor, that exploits the potential of a 30-pin configurable expansion connector to fully meet the configuration flexibility needs. Ideal for applications in digital signage and infotainment.
A System on Module is an ideal alternative to fully own electronics development. With our SoM approach, the benefits of purchasing a complete off-the-shelf Single Board Computer (SBC) and a custom electronic solution are perfectly combined.
LEC-iMX6R2 is a re spin of original LEC-iMX6 that complies with new SMARC 2.0 specification that adds a secondary LAN, increases LVDS bandwidth and provides optional DSI panel support. Product focusses primarily on entry level ETT applications.
i.MX6 DualLite core based SODIMM SOM, ARM Cortex A9 CPU @1GHz, HD 1080p encode & decode, 2D/3D Hardware Graphics Acceleration, Integrates all standard interfaces with ultra compact size platform used for multiple embedded & Industrial applications.