Linux Board Support Packages (BSPs) for NXP Silicon are tested and certified ensuring a fully operational tool chain, kernel and board specific modules that are ready to use together within a fixed configuration for i.MX hardware development tools. These BSPs provide the foundation you need to begin your project quickly.
Set of desktop applications for the Linux L3.10.53-1.1.0-GA-5.0.11P4 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes desktop applications. Refer to i.MX_6_Graphics_User's_Guide_review.pdf for documentation.
Set of applications for the Linux L3.10.17_1.0.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
Set of applications for the Linux L3.0.35_4.1.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
Processor Expert Software for i.MX Processors is a suite of configuration tools for the i.MX family of processors. It contains the Pin Settings Tool which provides an easy way to configure pin signals, from multiplexing (muxing) to the electrical properties of pins. With the Pin Settings Tool all the pins can be configured with a graphical user interface, and then generate normal C code which then can be used in the application.
Set of applications for the Linux L3.14.28_1.0.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
Set of applications for the Linux L3.10.53_1.1.0 BSP, designed to be used by graphics application developers to rapidly develop and port graphics applications. Includes applications, GPU Driver with vprofiler enabled and documentation.
NXP offers a portfolio of products and solutions that support your design cycle form start to finish. During your software development cycle the support team at NXP is here to help. Accelerate your design cycle by utilizing the NXP premium support team today
CoreAVI provides high performance embedded OpenGL ES and OpenGL SC graphics and H.264 video decode drivers, with support for a number of system configurations and RTOSs including Wind River VxWorks, DDC-I Deos, Green Hills INTEGRITY.
Wind River® Linux is the leader for building outstanding open source embedded products, ensuring customers work with the latest code from the most important open source efforts and most recent technologies.
Specialized middleware for hardened voice and video communication devices. Supports VoIP and video protocols including SIP, SIPS/SIP-TLS, RTP, sRTP, RTSP, mJPEG, webRTC, multicast, narrow/wide-band audio encoding with intelligibility enhancements.
emMQTT is provides the client functionality of the Message Queue Telemetry Transport protocol to a stack. emMQTT uses sockets and can be used with any IP stack such as emNet using the socket interface.
emModbus, SEGGER's implementation of the Modbus protocol, supports communication via UART (ASCII, RTU), Ethernet (Modbus/TCP and Modbus/UDP), and is capable to communicate with any Modbus compliant device.
Windows Embedded Compact 7 reference BSP for i.MX6, with support for SABRE LITE development kits. Includes advanced features such as optimized GPU graphical acceleration driver, wireless connectivity, NDIS6 ethernet, and multi-display support.
Windows Embedded Compact 7 Reference BSP for i.MX 6, with support for SABRE SDB dev. kits. Includes advanced features such as optimized GPU graphical acceleration driver, wireless connectivity, NDIS6 ethernet, and multi display support.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems
The GuruCE iMX6 BSP is a high quality, well structured, stable, full source BSP for WEC7 and WEC2013 supporting any board containing a NXP i.MX6 UL, ULL, Solo, Dual-Lite, Dual, DualPlus, Quad or QuadPlus processor.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
Green Hills offers scalable suite of integrated communication stacks, middleware and graphics solutions, including secure networking stacks and protocols, SNMP, web applications, wireless, CORBA, USB, CAN and advanced file systems.
VxWorks®, the industry’s leading real-time operating system, provides a family of products that deliver all the scalability, safety, security, and virtualization capabilities needed for today’s development challenges.
emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
The IoT Toolkit is a collection of libraries that enables communication with modern IoT based environments and devices. It's a high-performance collection of libraries optimized for minimum memory consumption in RAM, ROM, high speed, and versatility.
Alango’s Voice Activity Detection (VAD) technology reliably detects human speech in an acoustic signal. The technology is based on a proprietary, high-resolution spectral noise estimation algorithm operating in real time.
Voice Communication Package (VCP) is a universal software package of digital signal processing technologies for voice applications enabling high quality, full duplex, and noise free communication from various environments.
FreeRTOS+TCP is a scalable, open source and thread safe TCP/IP stack for FreeRTOS. FreeRTOS+TCP provides a familiar and standards based Berkeley sockets interface, making it as simple to use and as quick to learn as possible.
FreeRTOS+FAT is an open source, thread aware and scalable FAT12/FAT16/FAT32 DOS/Windows compatible embedded FAT file system. Featuring optional caching, directory name hashing, long file names, standard and extended error reporting, & stdio.h API.
eSync is a multi-company specification promoted by the eSync Alliance. It delivers and updates software and firmware over the air, while collecting real-time data from in-car devices including ECUs, domain master ECUs, network gateways and, sensors.
Most toolchains using GCC also use either newlib, newlib-nano or glibc. Unfortunately, these libraries have significant disadvantages over professional runtime libraries for embedded systems. This is where the SEGGER Runtime Library comes in.
Market leading RTOS from Real Time Engineers Ltd. that supports more than architectures and receives more than 100,000 downloads a year. Professionally developed, strictly quality controlled, robust, supported, free for use in commercial products.
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
Nucleus has been deployed in over 3 billion devices since 1993 making the code base extremely stable. Nucleus is the only RTOS that offers a Power Management Framework to compliment hardware power modes to conserve power usage in the device.
emCompress offers solutions to compress data for all kinds of applications where size matters. Designed for embedded systems, emCompress can compress and decompress data even on smallest microcontrollers.
A pre-Yocto graphical embedded Linux build environment that offers optimized workflows and “cleaned,” pre-configured BSP components so you can create custom BSPs easily and quickly. Timesys Factory is available in desktop and cloud configurations.
HyperCore™ (Hypervisor GPU Manager) is designed to enable the virtualization of graphics/video capabilities using one or more graphics processors being utilized by multiple instances of independent partitions or guest operating systems.
Specialized middleware for the deployment, configuration and management of Linux devices. Features a settings database, configuration engine and firmware management handler. Supports various methods including https, REST, SNMP, XML, config file.
A common challenge for manufacturers of embedded systems is to guarantee a system's firmware can be updated easily. To fix bugs in the field or to enhance the features of deployed systems, SEGGER provides emLoad, the bootloader for firmware updates.
Mbarx is an ecosystem of endpoints, tools and gateways that work together to form a chain-of-trust architecture. Mbarx does this by providing secure connectivity, configuration,operational control, and OTA firmware updates across IoT networks.
BD-SL-i.MX6 is a low cost development system for the i.MX6 processor. The board features a wide variety of connectivity options as well as multiple operating systems including JellyBean Android, TimeSys Linux, WinCE7, and QNX.
i.MX 8M, i.MX 8M Mini, i.MX6 Evaluation Kit with 7.0" capacitive touch display, SODIMM200 standard. All relevant interfaces of the i.MX6, i.MX 8M and i.MX 8M Mini processors are available and a complete development can be realized.
i.MX 8M, i.MX 8M Mini, i.MX6 Evaluation Kit with 5.0" touch display, SODIMM200 standard. All relevant interfaces of the i.MX6, i.MX 8M and i.MX 8M Mini processors are available. Supports e.g. Ethernet, USB, RS232, CAN, RS485, GPIO, SPDIF, UART, I2C
i.MX6Q Development Platform incorporates i.MX6Q Qseven SOM & Qseven compatible Carrier Card. The board is highly packed with all necessary on board connectors (MIPI Camera, Dual LVDS, Ac’97 codec, HDMI v1.4) to validate complete i.MX6Q SOM features
UDOO(TM) is an open hardware, low-cost computer equipped with an ARM(R) i.MX6 NXP (TM) processor for Android and Linux, alongside an Arduino (TM) Due ARM SAM3X. Both CPUs are integrated on the same board.
i.MX6Q SODIMM Development Platform incorporates i.MX6 SODIMM SOM & compatible carrier card. Development Kit is highly packed with all necessary on board connectors (HDMI, SATA, LVDS, UART, CAN etc.) to validate complete i.MX6 SODIMM SOM features.
i.MX 8M, i.MX 8M Mini, i.MX6 Evaluation Kit with 7.0" touch display, SODIMM200 standard. All relevant interfaces of the i.MX6, i.MX 8M and i.MX 8M Mini processors are available. Supports e.g. Ethernet, USB, RS232, CAN, RS485, GPIO, SPDIF, UART, I2C
i.MX 8M, i.MX 8M Mini, i.MX6 Evaluation Kit with 7.0" touch display, SODIMM200 standard. All relevant interfaces of the i.MX6, i.MX 8M and i.MX 8M Mini processors are available. Supports e.g. Ethernet, USB, RS232, Mini PCIe, Camera, GPIO, SPDIF, UART
JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.
The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKpro is compatible with Keil MDK and Arm DS.
I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is fully plug-and-play and completely integrated with IAR Embedded Workbench for ARM.
Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.
J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface of J-Trace PRO Cortex enables continuous streaming trace via USB with the full trace clock, lifting the limitations by internal buffers.
Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for our Unlimited Flash Breakpoints and GDB Server enhancement modules included.
Lauterbach has experience in making world class microprocessor development tools since 1979. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers and real-time trace solutions for all NXP processor series.
J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.
JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.
The panel mount HMI features extreme robustness and is easy to be integrated from the front into a cutout in the front of the housing. Available from 4.3 up to 12.1 inch and based on the latest Garz & Fricke embedded board solutions
PIXI-9377 is a fully certified (FCC, TELEC, IC, CE, RCM) dual-band Wi-Fi 802.11a/b/g/n/ac with Bluetooth 5 SDIO module optimized for cost, size and performance. It is based on the QCA9377-3 chipset and drivers for NXP i.MX Series are available.
uSD-M.2 adapter board provides out-of-box experience for NXP i.MX with Murata’s M.2 Module Family enabled by Embedded Artists; interfacing WLAN/BT-signals including WLAN-SDIO, BT-UART, BT-PCM/I2S, and GPIO's are included on M.2 connector pins.
Our turnkey single board computers are available in a rugged housing for DIN rail mounting as well. Take benefit from our experience and our highly scalable platform concept with uniform software distribution!
Type 1XA is a 2.4GHz & 5GHz module based on Infineon CYW54591 combo chipset which supports Wi-Fi 802.11a/b/g/n/ac 2x2 MIMO RSDB + BT 5.2 BR/EDR/LE up to 866 Mbps PHY data rate on Wi-Fi and 3Mbps on Bluetooth. Module dimensions are 11.4 x 8.9 x 1.4mm.
Type 1DX is high performance module based on Infineon CYW4343W combo chipset which supports Wi-Fi 802.11b/g/n + Bluetooth 5.1 BR/EDR/LE up to PHY data rate of 65Mbps on Wi-Fi and 3Mbps on Bluetooth. The module dimensions are 6.95 x 5.15 x 1.1mm.
We build our modules from start to finish—designing, manufacturing, and testing all of the DRAM ourselves before assembling the modules and testing again. So, from high-performance SODIMMs to high-density LRDIMMs, you can depend on Micron.
Type 1MW is a 2.4GHz & 5GHz module based on Infineon CYW43455 combo chipset which supports Wi-Fi 802.11a/b/g/n/ac + Bluetooth 5.0 BR/EDR/LE up to PHY data rate of 433Mbps on Wi-Fi and 3Mbps on Bluetooth. Module dimensions are 7.9 x 7.3 x 1.1mm.
The modern HMI with many design options for a seamless or even complete flush integration. Available from 4.3 up to 19 inch with a capacitive touchscreen and based on the latest Garz & Fricke embedded board solutions
This modular touchpanel system can be equipped with various electronic components and touch displays. The individual components are separately available or as assembly units. Based on Trizeps VII with i.MX 6, SODIMM200 standard
Type LV is a 2.4GHz & 5GHz module based on Infineon CYW43012 combo chipset which supports Wi-Fi 802.11a/b/g/n + Bluetooth 5.0 BR/EDR/LE up to PHY data rate of 72.2Mbps on Wi-Fi and 3Mbps on Bluetooth. Module dimensions are 10.0 x 7.2 x 1.4mm.
This module based on the imx6 is available with a set of standard configurations, but we offer the possibility to add any configuration requested and even a licensing model to get the design. This is a project based pro Development system available.
DIMM-MX6x for your embedded control solutions and multimedia devices. Board Support Package (BSP: -Linux (Debian 8.0) -Linux (Yocto 1.5.1) -Mainline Linux with_RT Patch -WEC7 and WEC2013 -QNX 6.6 -Android 4.4
Embedding the i.MX6 QuadPlus/Quad/Dual/DualLite/Single core ARM CA9, the VAR-SOM-MX6 allows designers to use a single System on Module in a broad range of applications to achieve short time-to-market, reduce R&D development risk and overall cost.
i.MX6 Solo core based Pico-ITX SBC, ARM cortex A9 CPU @800MHz, HD 1080p encode & decode, HD video playback in 2D/3D GPU. Highly integrated platform for increased performance in Industrial Control & Home Energy Management Systems
Module is based on the NXP® Cortex™ A9 CPU offering high performance, lowest power consumption and a high degree of functional integration for high level embedded applications. The i.MX6x processor is combined with DDR3 SDRAM, SLC NAND Flash and GbE
μQ7-962 is a Qseven® Rel. 2.0 Compliant Module designed by SECO that offers top computational and graphical performances given by low-power consuming ARM architecture. The board integrates i.MX6 Multimedia Applications platform from NXP
Supporting the i.mx6 Solo /DL /DualQuad /Singe core ARM Coretex A9, CPU VERA allows designers to use a single System modeule in a board range of applications to achieve short time-to-market for their current innovations, while still accomodating pote
CPU:i.MX6Q:Compatible with the industrial, commercial expansion grade Accept the 6U/S mass customization Memory：LPDDR21GB, up to 2GB Storage：SPI NorFlash/4GB EMMC, Up to 64GB EMMC Power Supply: 5V Size: 40mm x 42mm
The SYS-A62-10 is a 10.1” Panel PC based on the Multicore NXP i.MX6 SoC family. It features a long-endurance display (30K hours) with 1280 (RGB) X 800 resolution, along with P-Cap (Projected-Capacitive touch) technology and glass cover.
The FirstView SOM Carrier Board is a companion board to the FirstView SOM designed to speed up development of hardware and software. The carrier allows the developer to test multiple peripherals with network connectivity and user interfaces.
The Digital Beachhead (DBH) is a SWaP-optimized 16-port Vehicle Gigabit Ethernet Switch and Vetronics Computer. The DBH supports a wide range of network features as well as supporting VICTORY data bus and platform services.
Ultra-Low power SOM, based on the i.MX6 application processor with single/dual or quad core ARM® Cortex™-A9 architecture. Built on the SMARC form-factor,-40 to +85°C,up-to 4GB DDR3,optional PCIe switch on-board. Long term availability (10y)
The DuraDBH-672 Digital Beachhead is a rugged COTS Gigabit Ethernet switch & vetronics computer system capable of hosting optional VICTORY services software. This small form factor system weights 4 lbs and includes USB, CANbus, Serial, and other I/O.
TEP-1560-IMX6 is a modular, scalable, fanless 15.6 inch HMI based on a single/dual/quad core ARM Cortex-A9 NXP i.MX6 applications processor. Compatible with TechNexion expansion board series for additional input and output’s.
The design of the MSC Q7-IMX6 module is based on NXP’s new i.MX6 CPU offering quad-core, dual-core and single-core ARM Cortex™-A9 compute performance at very low power consumption and excellent graphics performance
The Nitrogen6X-SOM, a low cost, highly integrated System-on-Module based on the NXP i.MX6 Single/Dual/Quad-Core CPU. The SOM is ideal for customers looking for rapid product development while maintaining the flexibility of a custom design.
The single board computer NOVA which has an expansion board to carry the VERA i.MX6 is one of our design of the base plate. The flexible design allows the fast and easy way of realizing and upgrading the controller’s capabilities.
CPU：i.MX6QP/Q/U/S: Compatible with the automotive, industrial, commercial expansion grade Memory: DDR3 1GB, up to 2GB Storage: SPI NorFlash/4GB EMMC, Up to 64 GB EMMC Power supply: 5V Size: 40mm x 68mm
Utilite is a fanless ARM Cortex-A9 computer delivering high performance and rich I/O in a tiny form-factor. Utilite is offered with fully featured, desktop-grade Ubuntu Linux or Android operating systems with PC-like user experience.
i.MX6 Quad core based Pico-ITX SBC, ARM cortex A9 CPU @1GHz, HD 1080p encode & decode, HD video playback in 2D/3D GPU. Highly integrated platform for increased performance in Intelligent Industrial Control Systems, Home Energy Management Systems
ConnectCore 6 is an i.MX6 SMT multi-chip module. Features include integrated Wi-Fi, Bluetooth, PMIC and Kinetis Microcontroller. 400 pin LGA for reliable connection and access to all i.MX6/Kinetis features. 5-year warranty and global support.
The miriac™ SBC6x Single Board Computers are members of NXPs i.MX-Arm based embedded system solutions. The platform combines a very small system design (close to a module only form factor) with a wide variety of I/O functions.
The Nitrogen6_MAX is a turbo-charged version of our popular Nitrogen6X platform. Nitrogen6_MAX is a single board computer that features the same Quad-Core i.MX6 processor from NXP, but has significant upgrades to allow for high-end processing.
Single Board Computer based on i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex™ A9 ARM Core (up to Quad Core processors). All the advantages of an ARM architecture in an extremely reduced space
Measuring only 20x50 mm, the DART-MX6 is the smallest System-on-Module (SoM) supporting NXP i.MX6 quad and dual core Cortex-A9™ processor. The DART-MX6 offers impressive performance and scalability, as well as low power and high performance.
MSC SM2S-IMX6 module is based on NXP’s i.MX 6 processors offering quad-, dual- and single-core ARM® Cortex™-A9 compute performance at very low power consumption and excellent graphics performance combined with a high degree of functional integration
·NXP® i.MX 6S/U/Q:Compatible with the commercial expansion, automotive, industrial grade ARM Cortex-A9 Memory：DDR3 1GB, up to 2GB Storage：SPI NorFlash/4GB EMMC, Up to 64GB EMMC Power Supply: 5V Size: 40mm x 80mm
phyBOARD-Nunki is designed especially for image processing applications-a further development of our proven phyBOARD-Mira. It makes optimal use of the two Image Processing Units (IPU) of the i.MX 6Quad processor.
SideKick is based on Our i.MX6 and is a MXM compatible CPU module for fast multimedia focused applications. The i.MX6 module has on-board memory expandable to 4GB DDR3 RAM, 32GB eMMC flash and includes on-board micro SD slot and SPI flash.
TEP-1010-IMX6 is a modular, scalable, fanless 10.1 inch HMI based on a single/dual/quad core ARM Cortex-A9 NXP i.MX6 applications processor. Compatible with TechNexion expansion board series for additional input and output’s.
The Parvus DuraCOR 310 is an ultra-small tactical mission computer with NXP i.MX6 processor with rugged Flash disk & PCIe-Mini Card I/O expansion slots. Less than 40 in3 volume, 1.5 lb weight, 10W power, the DuraCOR 310 is ideal for UAV applications
High Reliable Boot, Encryption Engine, Random Number Generator, and Tamper Detection; Integrated 1x Industrial Gigabyte Ethernet MAC(10/100/1000MHz); Integrated 2x CAN, up to 1Mbps, support CAN 2.0 Protocol; Extended 3x serial interface, HDMI interface, LVDS display interface; Complete Compatible with Linux and Android embedded OS.
The phyCORE-i.MX6 SOM is the smallest industrial i.MX 6 design on the market. It is highly scalable supporting NXP i.MX 6Solo, Dual, or Quad processor variants and with configuration options for DDR3, eMMC, and SLC NAND.
Qseven® Rel. 2.0 Compliant Module with an ARM architecture and integrated i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex® A9 ARM Core (up to Quad Core processors)
NXP i.MX 6 Single, Dual and Quad Core ARM Cortex-A9 • SoC scalable from Solo Core up to Quad Core • x86-alike interface configuration • Design Services for application specific carrierboards and full custom designs
The SOM is an embedded single board module designed to be reliable, rugged, and low cost. The board is designed to be paired with a custom carrier board to fit specific applications in a wide range of environments.
The Nitrogen6X is a production ready i.MX6-based single board computer that can also be used for development purposes. The design allows customers to easily embed the Nitrogen6X into an enclosure and get to market quickly.
Voice control kits uses i.MX 6 processor, vicCONTROL industrial is ready-to-use out of the box. These kits allow a direct integration into an application development and demonstrates the performance of the system based on the demos.
This module has peak frequency up to 1GHz and RAM size of 2GB. Key benefits include industrial temperature support, long-term availability (until 2028), and a host of high-speed industrial interfaces such as PCIe, SATA, etc.
i.MX 6Quad with 4x 1GHz ARM Cortex-A9, up to 4 GB DDR3, 16 GB Nand, , 16 MB Nor, 1 Gbit Ethernet, LCD interface: 2x LVDS, 1x HDMI, optional up to 2x parallel Camera: 1x LVDS, up to 2x parallel, CSI; scalable to other phyFLEX SOMs
TEK3-IMX6 is a scalable, high-performance fanless box PC based on a single/dual/quad core ARM Cortex-A9 NXP i.MX6 series processor. Compatible with TechNexion expansion boards series for additional input and output’s.
i.MX6 Quad core based SODIMM SOM, ARM Cortex A9 CPU @1GHz, HD 1080p encode & decode, 2D/3D Hardware Graphics Acceleration, Integrates all standard interfaces with ultra compact size platform used for multiple embedded & Industrial applications.
Low-end Single Board Computer with NXP i.MX6 Processor, that exploits the potential of a 30-pin configurable expansion connector to fully meet the configuration flexibility needs. Ideal for applications in digital signage and infotainment.
A System on Module is an ideal alternative to fully own electronics development. With our SoM approach, the benefits of purchasing a complete off-the-shelf Single Board Computer (SBC) and a custom electronic solution are perfectly combined.
LEC-iMX6R2 is a re spin of original LEC-iMX6 that complies with new SMARC 2.0 specification that adds a secondary LAN, increases LVDS bandwidth and provides optional DSI panel support. Product focusses primarily on entry level ETT applications.