NXP Automotive audio video bridging (AVB) software provides complex AVB solution for multi-channel audio streaming and syntonized audio playback over multiple audio end nodes. It is optimized for NXP Power Architecture and Arm Processors with minimal resource usage due to "zero-copy" approach with advanced DMA algorithms.
CodeWarrior Development Studio for eTPU is a full-feature, Eclipse-based IDE for eTPU, eTPU2 and eTPU2+ application development. It contains a standalone C cross-compiler, preprocessor, assembler, linker, simulator, and debugger.
P and E's CYCLONE programmer is a powerful in-circuit, stand-alone programmer for many NXP processor families. It's a versatile tool that offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
NXP hosts a number of calibration, debug and interface boards for the VertiCal series of tools using MPCXXXX silicon. These tools allow memory expansion, alternative interfaces (such as nexus and JTAG) and offset adapters to avoid tight spaces on your target PC board setup.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
EB tresos AutoCore OS is an embedded real-time operating system that implements the latest AUTOSAR standard and all its scalability classes, including memory protection. It is available in single-core and multicore versions.
The eTPU2 'C' Compiler supports both the eTPU and eTPU2, and is highly optimizing producing code that is generally 5 to 20% tighter with reduced Worst Case Thread Length (WCTL). Also included are an assembler, linker/optimizer, and analyzer.
Develop with industry proven tools for C/C++ embedded applications, including compilers and run-time libraries, source- and assembly-level debugger, integrated development environment (IDE). Supports bare metal, Linux, Nucleus, other OS's.
Free command-line edition of the popular Sourcery CodeBench development tools. Available for NXP ARM and Power Architectures for bare metal bring-up, code debug in cache, ROM, RAM, Flash. Available now for free download.
Full IDE with editor, build, project management, state machine editor/compiler, and enhanced sim features such as a waveform viewer that displays both digital and discrete nodes. Comes with ETEC, the most full-featured eTPU C compiler on the market.
UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.
User Interface for Ashling emulator and simulator products. Supports a wide range of 8-, 16- and 32-bit processor architectures. Easily configurable to support different targets. Simultaneous debugging for both multi-core systems and coprocessors.
You can rely on a consistent, single-tool environment for electronic control unit (ECU) development with AUTOSAR. EB tresos Studio lets you configure, validate, and generate your ECU basic software (BSW).
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and Data Trace, and (iii) Performance Analysis and Code Coverage Analysis
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
The PowerPC Nexus Flash/EEPROM Programmer, for NXP's MPC55xx microprocessors, allows you to program both internal and external flash devices in-circuit via P&E's compatible Multilink or Cyclone hardware interfaces.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
Small and thin ceramic resonators and crystals that offer high oscillation frequency and remarkable oscillation tolerance, not only for consumer but also automotive applications. http://www.murata.com/products/timingdevice
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.